HOME

News

News

S M T W T F S
 
 
 
 
1
 
2
 
3
 
4
 
5
 
6
 
7
 
8
 
9
 
10
 
11
 
12
 
13
 
14
 
15
 
16
 
17
 
18
 
19
 
20
 
21
 
22
 
23
 
24
 
25
 
26
 
27
 
28
 
29
 
30
 
 
  • Independent Tracking Dual Beam (ITDB) Antenna

    The objective of this project was the design and breadboarding of a single ground station terminal antenna able to track two simultaneous satellites in MEO orbit allowing the handover process.

  • ADS

    ADS for antennas. The A-ADS system enables the deployment of satellite antennas with a large diameter and an extended focal length. The articulated (segmented) boom can be folded in several configurations on the spacecraft sidewall. Three hold-down points, based on similar technology as used on Airbus Defence and Space NL solar arrays (heritage of >500 releases with 100% success), will assure safe accommodation during launch and shock-free release in orbit. The boom deploys by means of spring-driven hinges interconnected by means of synchronization cables, similar to solar arrays. The deployment speed is controlled by an actuator. When fully deployed, the hinges are locked, providing a very stiff structure, essential for disturbance-free pointing of the antenna. The pitch-and-roll pointing mechanism (ADTM Mk2 gimbal by Airbus Defence and Space with over 23 in orbit), is located close to the reflector assuring high pointing accuracy. The A-ADS has a modular design, which allows a wide range of mission configurations by tuning only a few design parameters. This approach in combination with the use of standard building blocks minimizes the non-recurring design effort for a specific application and allows any desired configuration. A special kinematic model is available to assess the design parameters of the A-ADS based on customer inputs.

  • Generic Flexible Payload Solution

    Enhancing capacity and flexibility is one of the major challenges for new-generation of payloads. The interest of two major European Telecommunication Operators for these solutions has motivated the present study in order to define the possible Generic Payload Solutions in line with the Operator views and with the objective of taking benefit of their guidelines for the down-selection of preferred payload scenarios.

  • VEGA

    VEGA will introduce DVB-S2X capabilities into the Newtec Dialog multiservice platform as well as developed the high performant MDM5000 modem as addition to the Newtec modem portfolio.

  • New LCAMP Technologies

    In order to reduce equipment cost a Breadboard LCAMP based on new and innovative technologies and equipment tuning is to be developed. Herby development activities are focused on three main issues: 1) Mixed Signal ASIC to achieve maximum integration of electrical components 2) LTCC technology including a cost- and time-minimized assembly process 3) Fully automated equipment tuning