The objective of the activity is to de-risk software mitigation techniques for radiation effects on a family of high-performance processors embedded in System on Chip (SoC) components. The activity will identify, on one or more processors of interest for the industry, radiation-induced failure modes and will implement appropriate software mitigation techniques with reuse or development of small FPGA IPs if needed. Targeted Improvements: Enable…

The objective of the activity is to develop, manufacture and test a power module with a new concept for Li-Ion battery management and with an advanced Electrical Power System Telemetry able to collect, store, retrieve and process large quantity of data related tothe Status of the Power System (SA, Battery, PCDU). A digital oscilloscope for the Built-In Test function and a function to analysein flight the degradation of solar arrays will be imp…

Objective: The objective is to develop and test a Ku or Ka band transparent phased array antenna to provide broadband connectivity on board cars. Targeted Improvements: Develop a new class of phased array antennas for cars able to guarantee a seamless broadband connectivity with LEO satellites. Description: There is today a significant interest to provide broadband connectivity to cars. This request is associated to the need to guarantee emerg…

Objective: The objective of the activity is to design, implement and test a scaled engineering model with critical functions of a multi-beam receive antenna for satellite-based air traffic surveillance in the frequency range 950 - 1100 MHz, taking into account narrow beamwidth, directivity and mechanical constraints. Targeted Improvements:- Two-fold increase, compared to the state of the art, in the number of beams covering the visible Earth (…

The objective of this activity is to design, develop and test a device that will enable fast (almost instantaneous) connection of two waveguides eliminating need for laborious removal and reinstallation of numerous nuts and bolts from the waveguide flanges. The connection achieved with this assembly shall demonstrate high reliability both in mechanical and electrical aspects and minimise the risk of assembly error. Targeted Improvements:- 95%…

The objective of the activity is to produce a software development environment able to configure and build the full avionics software of a satcom using a model-based approachTargeted Improvements:- Reduction of up to 50% of the development time of the avionics system functions,- Enable one avionic platform to support many missions while being fully reconfigurable in flight.Description:The availability of System-on-Chip, powerful micro-control…

The objective of the activity is to develop and test data, control and signalling protocols to enable spectrum sharing among co-existing satellite Internet-of-Things (IoT) networks for new frequency allocations (i.e. below 5 GHz according to resolution 812 WRC 2019) that are on the agenda of the World Radio-Communication Conference (WRC) in 2027. The activity will include a measurement campaign to quantify the interference environment using ex…

The objective of the activity is to design, manufacture and test an engineering model of a standalone subsystem that will collect telemetry and command logs. In the event of mission failure the device will communicate this to the mission operations team to improve the speed and depth of understanding behind the root-cause of the mission failure. Targeted Improvements: Enabling higher operational reliability of nano- and microsatellites by impr…

The objective of this activity is to design, manufacture and test Ka-band high efficiency amplifier monolithic microwave integratedcircuit (MMIC) based on silicon technology for user terminals. Targeted Improvements:- Amplifier power added efficiency above 30% with a noise power ratio of 15 dB minimum- Key building block for future highly integrated Ka-band user terminal active antennas. Description:The satcom market requires highly integrated…

The objective of this activity is to design, develop, test in a lab environment and over representative conditions a multi-constellation broadband UAV terminal prototype, i.e. a fixed-wing UAV terminal prototype including modem and RF front-end, that transmits via multiple beams towards multiple satellite orbits (GSO or NGSO) high data rate payload data to both commercial and governmental frequency bands.

The objective of the activity is to develop a digital model of a high voltage module typically used in power processing units for electric propulsion or travelling wave tube amplifiers. This model or "digital twin" shall enable an in-depth evaluation which is today only possible by test.Targeted Improvements: Enabling a new approach to achieve innovation acceleration of high voltage module design and test, leading to:- decrease of th…

Objective: The objective of the activity is to develop and test NGSO networking techniques for 5G V2X services. The developments will be implemented and verified in a simulator modelling realistic system scenarios of 5G LEO satellites. Targeted Improvements: Enabling the provision of 5G V2X services by satellite. Description:Due to their low altitudes, LEO satellite systems may offer low-latency 5G connectivity that, paired with on-board edge…

The objective of this activity is to design, develop and test enabling technologies for multi-frequency transmit active antennas. This will include antenna radiating elements, beamforming techniques (analogue vs hybrid), active elements customised in order to cover both the Ku and Ka transmit frequency bands, integrated into a breadboard. Targeted Improvements: Enabling dual Ku and Ka-band transmit active phased arrays. Description: Active ant…

The objective of the activity is to develop precoding techniques for the forward link of multi-beam LEO satellite systems operatingin full frequency reuse. The activity will target the conventional single-satellite precoding, as well as precoding across adjacentsatellites having beams with overlapping footprints. The developed techniques will be implemented and tested in a software simulator able to assess the performance at both link level an…

The objective of the activity is to test electrical insulation methods to replace reliable electrical insulation by reliable simpleelectrical insulation and to provide inputs to guidelines to ECSS-E-ST-20C Rev2.Targeted Improvements:Mass, volume, manufacturing time reduced by a factor of 2 compared to current reliable insulation technologies.Description: Double insulation rules lead tooversize electrical architectures to make them robust to s…

The objective of the activity is to develop and test a real time 100 Gbps erasure code (both coder and decoder components) for optical feeder link protection.Targeted Improvements:Ensure high availability nominally required in feeder links by exceeding 99.5% of link availability due to atmospheric turbulence.Description:The use of terrestrial COTS optical transceivers in optical ground-space and space to space link will enable high throughput…

The objective of the activity is to develop and test a computer-assisted approach for in-situ operational health monitoring and anomaly detection for mission-critical platform mechanisms (e.g., reaction wheels, solar array drive mechanisms, antenna pointing mechanisms, laser communication terminals, etc.) in telecommunication spacecraft. Rather than relying on telemetry data, this activity will develop an approach using the full signal and sen…

The objective of the activity is to design, manufacture and test an engineering model of a multi-band (Ku and Ka-band) integrated power amplifier for application in Lower Earth Orbit satellites, enabling seamless flexibility and reconfigurability for active antenna arrays. Targeted Improvements: Enabling technology for seamless Ku- and Ka-band flexible payloads:- reduces mass and volume by 50%,- improves reliability, bill of material and quali…

The objective of the activity is to identify, design, manufacture and test critical technology and hardware elements needed for a high voltage electric power system (EPS) for high power telecom applications. This shall include typical primary and secondary DCDC converters and protection circuits (e.g. latching current limiters). Targeted Improvements:- Increase bus voltage up to > 300V, enabling direct drive for electric propulsion;- Reduce…

The objective of the activity is to develop, implement and test a 100 Gbps class interface radiation mitigation IP core for programmable logic devices for application in Low Earth and Geostationary Orbits. This includes hardware radiation characterisation and testing. Targeted Improvements: 3 to 4 times improvement of high-speed serial link data rate (from 32 Gbps to 112 Gbps) under radiation conditions. Description: State of the art programma…

Objective: This activity aims at developing a modular software tool allowing to simulate the improvement from employing adaptive optics (AO) systems in bidirectional optical ground station (OGS) to satellites optical communication and quantum links scenarios (e.g. GEO, LEO, MEO). Targeted Improvements: 50% improvement of design time and computation time to dimension optical communication systems operating through atmospheric turbulence enhance…

Objective: The objective of this activity is to design, develop and test a 5G system to support upper layer Access Traffic Switching, Steering and Splitting (ATSSS) mechanisms relating a User Equipment (UE) data session across dual terrestrial and satellite 5G access, as well as over dual 5G satellite access.Targeted Improvements:- Enable dual 3GPP access- Significant part reduction - Network and device centric system- Enable 5G Core Network w…

The objective of the activity is to design, manufacture and test technologies enabling the removal of failed small satellites (e.g.tumbling) from low earth orbit. Several breadboards will be developed and tested to reduce tumbling and to enable rendezvous and capture.Targeted Improvements: Enabling de-orbiting of large constellations of low Earth orbit telecommunication satellites. Description: In the coming years it is expected that the numbe…

ESA will support an initiative to define a future amateur satellite payload in geostationary orbit. ESA proposes that this activitywill be implemented by a combination of collaborative internal, industrial, and amateur efforts, all within the financial envelope as indicated. The activity shall consolidate requirements from the amateur and commercial satellite industry, trade-off several payload options, address the future user segment, develop…

The Objective: The objective of the activity is to design, manufacture a testbed to determine materials behaviour of atomic oxygen fluence exposure representative in Very Low Earth Orbit (VLEO) environment. With the help of the testbed, in a second step, an aerodynamic and oxygen fluence resistant coating will be developed and evaluated as needed for protection of exposed parts of the spacecraft to the VLEO environment.Targeted Improvements: E…