Objective: This activity aims at developing a modular software tool allowing to simulate the improvement from employing adaptive optics (AO) systems in bidirectional optical ground station (OGS) to satellites optical communication and quantum links scenarios (e.g. GEO, LEO, MEO). Targeted Improvements: 50% improvement of design time and computation time to dimension optical communication systems operating through atmospheric turbulence enhance…

Objective: The objective of the activity is to develop and test different sized packaging solutions with optical and electronic feed-throughs, which allow commercial photonic chips to be deployed in space. Targeted Improvements: By developing innovative packagingtechniques, some types of high-volume parts developed for terrestrial telecommunications markets can be made available for space. Description: This activity aims to establish a packagi…

Objective: The objective of this activity is to design, develop and test a 5G system to support upper layer Access Traffic Switching, Steering and Splitting (ATSSS) mechanisms relating a User Equipment (UE) data session across dual terrestrial and satellite 5G access, as well as over dual 5G satellite access.Targeted Improvements:- Enable dual 3GPP access- Significant part reduction - Network and device centric system- Enable 5G Core Network w…

The objective of this activity is to design, develop and validate a system architecture and suitable waveform for an Aeronautical Mobile-Satellite (Route) Services (AMS(R)S) constellation in C-band for safety and security services.

The Objective: The objective of the activity is to design, manufacture a testbed to determine materials behaviour of atomic oxygen fluence exposure representative in Very Low Earth Orbit (VLEO) environment. With the help of the testbed, in a second step, an aerodynamic and oxygen fluence resistant coating will be developed and evaluated as needed for protection of exposed parts of the spacecraft to the VLEO environment.Targeted Improvements: E…

The objective of the activity is to develop rapid and flexible advanced manufacturing techniques, with a full digital workflow, forhigh volume production of complex-shaped composite reflector antennas from 1 to 3.5 metres in diameter.Targeted Improvements:Reduction in composite reflector manufacturing time by a factor of five in comparison to standard metallic mould processes.Description:Today, the manufacturing lead time of reflector antennas…

The objective of this activity is to develop the software protocol stack for Release 18 enhancements related to 5G New for Radio (NR) for Non-Terrestrial Networks. The software protocol stack development shall be based on a testbed considering both the User Equipment (UE) and g-NodeB (gNB) features and operational procedures.Targeted Improvements:Enable 5G NR NTN system performance simulations with the latest Release 18 modifications.Descripti…

The objective of the activity is to develop and test signal reception techniques that enable uncoordinated satellite access schemesin the maritime bands for VHF Data Exchange (VDE) by a population of maritime transmitters in the presence of in-band interference from maritime and external sources such as in-land terrestrial services. The techniques will be implemented and evaluated in a prototype receiver to be developed as part of the activity…

Objective: The objective of this activity is to design, develop and test automotive prototypes following 5GAA workplans and increase the number of companies working on automotive satellite communications by 30%. Targeted Improvements: Novel hand-over methods between satellite and terrestrial networks supporting use cases as formulated by 5GAA and miniaturised automotive terminal baseband units.Description: The 5G Automotive Association (5GAA)…

The objective of the activity is to develop technology to prevent non authorised usage of satellite communication bandwidth throughthe implementation and enforcement of on-board authentication protocols. During this activity+ a breadboard that implements such protocol will be developed in a laboratory environment.

Objective: The objective of the activity is to design, manufacture and test a magnetic bearing system for high-speed rotary mechanisms in telecommunication spacecraft applications (e.g. reaction wheels or thermal control pumps and compressors). Targeted Improvements:- Increase rotation speed by a factor of 2 (resulting in higher angular momentum capability). - Increase lifetime by a factor of 2 (due to contact-less bearings and no lubrication)…

The objective of this activity is to develop a machine learning (ML) engine that optimises handover between two different 5G networks, where at least one of them is a satellite-based non-terrestrial network (NTN). The activity will also provide the testbed to assess the handover key performance indicators in a laboratory environment.Targeted Improvements:Identify and avoid higher risk handovers improving thus the handover success rate to reach…

1. Introduction.Four new technology and product development activities are added in 2021, that have already been identified as useful to the foreseen development of next-generation 4S solutions over the coming years. These work plan activities will be issued under the legal framework of the ARTES 4.0 Strategic Programme Line (SPL) Space Systems for Safety and Security (4S).2. ImplementationPhasing: phasing of the contractual activities may be…

The objective of this activity is to evaluate the pros and cons of a weather-proof optical ground terminal (without protective domeenclosure) and to breadboard critical sub-systems. Targeted Improvements:At least 50% faster optical ground station deployment.Description:Today telescopes for ground based free-space optical satellite communication are originating from astronomical telescopes. The current need for optical ground telescopes has cha…

The objective of this activity is to develop and test a modular 100W-class Ku- and Ka-band universal compact Electronic Power Conditioner (EPC) based on MHz-range switching frequency, high temperature, wide bandgap technology and planar magnetics. This will include an efficient thermal management design.Targeted Improvements: - Mass, footprint and volume reduction up to 30% whilst maintaining efficiency comparable to current state of art.- Com…

The objective of the activity is to test the performance of beyond line-of-sight narrow-band communication links between ground andLEO satellites in operational conditions. One of the key aspects of the experiment is the effect of ionospheric refraction and reflection as an enabler of satellite links beyond the line of sight. The activity will include the development of a small payload and aground terminal. Targeted Improvements:Enabling new s…

The objective of the activity is to develop very low power analogue photonic interconnects for linking antennas to the on-board digital processor in high throughput satellites, also in view of an all-optical satellite implementationTargeted Improvements:Increase connector density by 100% through the replacement of the coaxial cable connectors with multi-fibre connectors, more than halvingthe harness mass and volume linking the antennas to the…

The objective of this activity is to develop the technology step needed to enable the use of optical interconnects at speeds of up to 112 Gbps. This should be demonstrated through testing of an integrated digital signal functions (ASIC and FPGAs) with the developed electro-optic transceiver photonic integrated circuits that form the optical I/Os to replace traditional electrical I/O.Targeted Improvements:Increase the data rate throughput up to…

This Call for Proposals covers the industry initiated activities for the four Programmes lines identified below:ARTES Core Competitiveness Generic ProgrammeLine- Component B: Competitiveness GrowthARTES Strategic Programme Line Space for 5G/6G and Sustainable Connectivity ARTES Strategic Programme Line Space Systems for Safety and Security (4S)ARTES Strategic Programme Line Optical and Quantum Communication - ScyLight. The participating state…

This Call for Proposals covers the industry initiated activities for the Civil Security for Space programme.

The Pioneer programme, implemented under the ARTES 4.0 Generic Programme Line "Partnership Projects", aims to supports the emergence of Space Mission Providers (SMPs), i.e. commercial entities interested in becoming one-stop-shop service providers for public and private customers. The Open Call for proposals is aimed to offer the opportunity for new companies from across all ESA member states to participate in the programme. It will…

The objective of this activity is to develop an integrated structural antenna concept for high aspect ratio satellites. The antenna concept shall be frequency and size scalable. Critical breadboarding shall be carried out to evaluate the concept for mobile satellite communication systems in Low Earth Orbit. Targeted Improvements: Enabling stackable satellites with efficient launch volume occupation with an improvement of 30% in comparison to e…

The objective of this activity is to develop a testbed that allows the demonstration of vehicle-to-everything (V2X) 5G services viasatellite. Using existing satellite assets and on-ground antenna for mobile applications (not necessarily aesthetically attractive), the test bed shall address both forward and return link traffic, to support the definition of future V2X applications and associated technical enhancements. The set of services to be…

Objective: Design and demonstration of link protection and restoration protocols that can be deployed to provide optical feeder link diversity in mega-constellations with inter-satellite links. Targeted Improvements: >30% increased optical network throughput witha reduced number of ground stations and reduced CAPEX. Description: Optical feeder links for LEO satellite systems suffer from frequent disruptions due to cloud blockages that rende…

The objective of this activity is to develop and evaluate efficient digital beamforming algorithms and techniques that are compatible with non-uniform antenna arrays or non-uniform beam lattices. The developed techniques will be implemented and evaluated on a representative processor test bed. Targeted Improvements: 30 to 70% power reduction on the implementation of digital beamforming algorithms with non-uniform input/outputs with respect to…