For planet earth and beyond
Funding
This page displays the ARTES Invitation To Tenders (ITTs) which are published on ESA-STAR. If you are looking for a specific element select from the list provided and click on the Apply button to start the search and display the results.
Funding of the individual Prime or subcontractors, for ARTES Core Competitiveness and ARTES Applications activities, is subject to authorisation of the required ARTES budget by the related National Delegations. Therefore, bidding teams are requested to inform their National Delegation(s) of their intention to participate in funded activities already before submitting a proposal.
The official information platform for providing potential bidders all the relevant documentation and details concerning the intended and issued Invitations To Tender (ITTs) for Open Competitions and Direct Negotiations is ESA-STAR - managed and operated by the ESA Procurement Department.
HIGH EFFICIENCY SILICON-BASED AMPLIFIER FOR KA-BAND USER TERMINALS (ARTES AT 7B.067) (ON DELEGATION REQUEST)
The objective of this activity is to design, manufacture and test Ka-band high efficiency amplifier monolithic microwave integratedcircuit (MMIC) based on silicon technology for user terminals. Targeted Improvements:- Amplifier power added efficiency above 30% with a noise power ratio of 15 dB minimum- Key building block for future highly integrated Ka-band user terminal active antennas. Description:The satcom market requires highly integrated…
5G AUTOMOTIVE MAKERSPACE (ARTES 4.0 SPL 5G/6G 3F.010)
Objective: The objective of this activity is to design, develop and test automotive prototypes following 5GAA workplans and increase the number of companies working on automotive satellite communications by 30%. Targeted Improvements: Novel hand-over methods between satellite and terrestrial networks supporting use cases as formulated by 5GAA and miniaturised automotive terminal baseband units.Description: The 5G Automotive Association (5GAA)…
ARTES 4.0 SPL 4S 3A.199 RADIO RESOURCE MANAGEMENT TECHNIQUES FOR JAMMING MITIGATION IN NGSO CONSTELLATIONS
The objective of the activity is to design, develop and test jamming mitigation strategies for NGSO broadband secure systems based on adaptive radio resource management algorithms.
DEVELOPMENT OF A TESTBED TO ASSESS SPACECRAFT MATERIALS ROBUSTNESS AGAINST ATOMIC OXYGEN IN VERY LOW EARTH ORBIT ENVIRONMENT (ARTES AT 4A.101)
The Objective: The objective of the activity is to design, manufacture a testbed to determine materials behaviour of atomic oxygen fluence exposure representative in Very Low Earth Orbit (VLEO) environment. With the help of the testbed, in a second step, an aerodynamic and oxygen fluence resistant coating will be developed and evaluated as needed for protection of exposed parts of the spacecraft to the VLEO environment.Targeted Improvements: E…
HANDOVER ENGINE AND TESTBED FOR SATELLITE-BASED 5G NON-TERRESTRIAL NETWORKS (NTNS) (ARTES 4.0 SPL 5G/6G 3F.015)
The objective of this activity is to develop a machine learning (ML) engine that optimises handover between two different 5G networks, where at least one of them is a satellite-based non-terrestrial network (NTN). The activity will also provide the testbed to assess the handover key performance indicators in a laboratory environment.Targeted Improvements:Identify and avoid higher risk handovers improving thus the handover success rate to reach…
PRECODING FOR LOW EARTH ORBIT SATELLITE SYSTEMS (ARTES AT 3C.027) (ON DELEGATION REQUEST) - EXPRO+
The objective of the activity is to develop precoding techniques for the forward link of multi-beam LEO satellite systems operatingin full frequency reuse. The activity will target the conventional single-satellite precoding, as well as precoding across adjacentsatellites having beams with overlapping footprints. The developed techniques will be implemented and tested in a software simulator able to assess the performance at both link level an…
WEATHER-PROOF OPTICAL COMMUNICATION GROUND TERMINAL (ARTES 4.0 SL SPL 6C.050 ) EXPRO PLUS
The objective of this activity is to evaluate the pros and cons of a weather-proof optical ground terminal (without protective domeenclosure) and to breadboard critical sub-systems. Targeted Improvements:At least 50% faster optical ground station deployment.Description:Today telescopes for ground based free-space optical satellite communication are originating from astronomical telescopes. The current need for optical ground telescopes has cha…
EUROPEAN CHIP INDUCTOR FOR POINT OF LOAD CONVERTERS IN TELECOMMUNICATION SATELLITES (ARTES 4.0 AT 5C.499)
The objective of the activity is to design, manufacture and test surface mount chip inductors enabling low voltage (down to 0.8 V range) stability, fast transient response, high-speed switching capability and efficient power conversion of point of load(POL) converters, as needed for next generation digital integrated circuits in telecommunication satellites.Targeted Improvements:- Enablinga European source.- 20% mass and volume reduction and 2…
USER TERMINAL SIGNALLING FOR NON-GEOSTATIONARY SATELLITE NETWORKS (ARTES 4.0 AT 7B.074) (RE-ISSUE)
The objective of the activity is to design, implement and validate signalling and control techniques for satellite user terminals in a non-geostationary satellite network where the user terminals can login and function in the network without necessarily relying on the assistance from global navigation satellite services. Targeted Improvements: Enable autonomous commissioning, login and operation of satellite user terminals within a non-geostat…
MASS PRODUCTION THRUSTER TESTING TECHNOLOGY (ARTES AT 4B.175) (ON DELEGATION REQUEST)
The objective of the activity is to develop a concept for efficient testing of thrusters for large constellations that reduces the test-setup complexity and test duration by an order of magnitude. The concept shall be implemented and experimentally validated in ascalable testbed for high volume testing of the electric propulsion systems. Targeted Improvements: Increase the number of electricthrusters (minimum of 4 to 8) to be tested simultaneo…
COMPACT, HIGH TEMPERATURE AND MODULAR 100 W-CLASS ELECTRONIC POWER CONDITIONER FOR KU- AND KA-BAND TRAVELLING WAVE TUBES (ARTES AT 5C.514)
The objective of this activity is to develop and test a modular 100W-class Ku- and Ka-band universal compact Electronic Power Conditioner (EPC) based on MHz-range switching frequency, high temperature, wide bandgap technology and planar magnetics. This will include an efficient thermal management design.Targeted Improvements: - Mass, footprint and volume reduction up to 30% whilst maintaining efficiency comparable to current state of art.- Com…
EXTENSION OF ELECTRICAL POWER SYSTEM VOLTAGE TO 300V (ARTES AT 4F.146) (ON DELEGATION REQUEST)
The objective of the activity is to identify, design, manufacture and test critical technology and hardware elements needed for a high voltage electric power system (EPS) for high power telecom applications. This shall include typical primary and secondary DCDC converters and protection circuits (e.g. latching current limiters). Targeted Improvements:- Increase bus voltage up to > 300V, enabling direct drive for electric propulsion;- Reduce…
POWER EFFICIENT ONBOARD ANALOGUE PHOTONIC INTERCONNECTS FOR HIGH THROUGHPUT SATELLITES (HTS) (ARTES 4.0 SL SPL 5F.050)
The objective of the activity is to develop very low power analogue photonic interconnects for linking antennas to the on-board digital processor in high throughput satellites, also in view of an all-optical satellite implementationTargeted Improvements:Increase connector density by 100% through the replacement of the coaxial cable connectors with multi-fibre connectors, more than halvingthe harness mass and volume linking the antennas to the…
DEVELOPMENT OF A SOFTWARE BASED GENERIC OPTICAL GROUND STATION MODEL (ARTES 4.0 SL SPL 6B.126)
The objective of this activity is to develop and test a software platform acting as an abstraction layer between the optical groundstation software client and the various software and hardware modules and their interfaces. Software implementation to be agnostic to operating systems and shall be based on object-oriented techniques to enable creation of a generic optical ground station model prior to programming. Testing shall and use commercial…
LESS THAN ONE WATT STANDBY ON-OFF POWER SWITCHING FRONT END FOR TELECOM UNITS (ARTES 4.0 AT 4F.164)
The objective of the activity is to develop, manufacture and test an on-off power switching front end for all platform units, consuming less than 1W when set in standby mode and capable to turn on the unit power converter with a command sent over the power bus.Targeted Improvements:- Reduction of 15% of the platform harness mass, of the AIT operations.- Reduction of the unit mass by 10% and of platform dissipation by 30%-50%.- Simplification o…
CRITICAL BREADBOARDING ENABLING THE REMOVAL OF FAILED SMALL SATELLITES FROM LOW EARTH ORBIT (ARTES AT 4A.085) (ON DELEGATION REQUEST)
The objective of the activity is to design, manufacture and test technologies enabling the removal of failed small satellites (e.g.tumbling) from low earth orbit. Several breadboards will be developed and tested to reduce tumbling and to enable rendezvous and capture.Targeted Improvements: Enabling de-orbiting of large constellations of low Earth orbit telecommunication satellites. Description: In the coming years it is expected that the numbe…
KA-BAND TRANSMIT SPARSE ACTIVE PHASED ARRAY AND BEAMFORMING NETWORKS FOR NGSO USER LINKS (ARTES AT 5B.240)
The objective of this activity is to design, manufacture and test a partial RF breadboard of a transmit Ka-band, active phased array antenna and associated beamforming network for user links NGSO, exploiting irregular layouts for the radiating elements and beamforming networks.Targeted Improvements: In comparison to a standard, fully populated array:- 25% reduction in the number of active controls,- 5% increase in the DC to RF power efficiency…
ARTES 4.0 SPL 4S 7B.077 - EMERGENCY LIGHTS FOR CARS IN DISTRESS WITH INTEGRATED TERRESTRIAL AND SATELLITE CONNECTIVITY (ON DELEGATION REQUEST)
The objective of the activity is to develop and test a prototype of the emergency car light device with direct to satellite communication capability in an emulated environment in laboratory.Procurement Policy: C(1) = Activity restricted to non-prime contractors(incl. SMEs). For additional information please go to:…
SECURITY ASSESSMENT, TESTING AND VALIDATION CAPABILITY FOR INNOVATIVE SECURE COMMUNICATIONS AND QUANTUM TECHNOLOGIES (ARTES 4.0 4S SPL 3D.018) RE-ISSUE
The objectives of the activity are to identify the needs and requirements for new security assessment capabilities for satcom systems and their components, define related architectural solutions and develop prototypes of the main components of these capabilities.Targeted Improvements: Enabling testing, verification and validation of advanced technologies in the domain of cybersecurity, modern telecom and quantum security (Quantum Key Distribut…
IN ORBIT EXPERIMENT OF AUTONOMOUS DEPLOYMENT AND EARLY OPERATIONS FOR TELECOM CONSTELLATION SATELLITES (ARTES AT 3E.024) (ON DELEGATION REQUEST)
The objective of this activity is to design and perform an in-orbit experiment investigating autonomous deployment and early operations for telecom constellation satellites. This includes the development of command and data-handling hardware as well as AI/ML based operational algorithms developed on-ground.Targeted Improvements: Increase of onboard autonomy by 50% (i.e. include the key number of autonomous functions), including attitude acquis…
BROADBAND TUNEABLE KA-BAND FREQUENCY MULTIPLEXERS (ARTES AT 5C.430) (ON DELEGATION REQUEST)
The objective of this activity is to design, manufacture and test two breadboards corresponding to a reconfigurable 4-channel 30 GHz low power Combiner Frequency Multiplexer (CMUX) and a 4-channel 20 GHz low power frequency Demultiplexer (DMUX). Targeted Improvements: Replacement of conventional fixed-bandwidth CMUX and DMUX equipment with a tuneable solution capable of supporting agile traffic management.Description: Current broadband satelli…
HIGH IMPULSE ARGON ELECTRIC THRUSTER (ARTES AT 4B.181)
The objective of the activity is to design, manufacture and test an electric thruster using Argon propellant, compatible with the long lifetime and high total impulse requirements of telecommunication satellites in GEO and for constellations.Targeted Improvements:- Novel capability to operate with Argon propellant not existing today.- Improved lifetime and Total Impulse per kW(N.s/kW) by a factor of 2.- Decreased complexity of the thruster arc…
ADAPTIVE THERMAL CONTROL OF TELECOM SATELLITES (ARTES 4.0 AT 4D.082) (RE-ISSUE)
The objective of the activity is to develop and test a breadboard of an electrophoretic panel enabling adaptive thermal control on telecommunication spacecraft. Targeted Improvements:-Enabling technology to allow adaptive control of radiative surfaces.-Reduction in heater power of 40% and in radiator size of 30%. Description: Traditional thermal design balances emissivity and absorption parameters based on surface materials and/or coatings sel…
CATHODE FOR OXYGEN-RICH ENVIRONMENT (ARTES 4.0 AT 4B.172)
The objective of the activity is to develop, manufacture and test a cathode for use as a neutraliser in electric propulsion systemsand suitable for operation in an oxygen-rich environment for a long duration of time (e.g. >5 years).Targeted Improvements:Enabling cathode capable of operating in an oxygen-rich environment for more than a few hours.Description: Platforms operating in Very Low Earth Orbit (VLEO) require prolonged and/or continu…
AUTOMOTIVE S-BAND ANTENNA FOR SATELLITE IOT AND 5G TERRESTRIAL COMMUNICATIONS (ARTES SPL 5G 7C.062) (UPON DELEGATION REQUEST)
Upon Delegation Request (*) The objective of the activity is to develop, manufacture and test an integrated automotive S-band antenna that combines satellite IoT and 5G terrestrial communications. Targeted Improvements: Reduction of antenna form factor from a protruding antenna (e.g. shark fin shape) to planar antenna fully integrated in the car roof. Bandwidth increase from 30 to 90 MHz for satellite and 5G communications. Description: The In…