The objective of the activity is to develop, manufacture and test a latch to enhance the deployed stiffness of an existing array, by means of a slight repositioning of panels. Targeted Improvements: Increase the frequencies of the deployed array by 30%.Description: Most telecommunication solar arrays comprise in-line panels, arranged in a row. Some include lateral panels, forming a cross configuration. In the case of the latter, the frequency…

The objective of this activity is to develop and test a modular 100W-class Ku- and Ka-band universal compact Electronic Power Conditioner (EPC) based on MHz-range switching frequency, high temperature, wide bandgap technology and planar magnetics. This will include an efficient thermal management design.Targeted Improvements: - Mass, footprint and volume reduction up to 30% whilst maintaining efficiency comparable to current state of art.- Com…

The objective of the activity is to develop and test a coating material (e.g. for substrates such as carbon fibre reinforced polymer, polymers, etc) with improved atomic oxygen and drag resistance to be used on the external satellite surfaces for very low Earth orbit applicationsTargeted Improvements:- Enabling technology not existing today; allowing telecommunication satellites with conventional construction materials in much lower orbits tha…

The objective of the activity is to develop very low power analogue photonic interconnects for linking antennas to the on-board digital processor in high throughput satellites, also in view of an all-optical satellite implementationTargeted Improvements:Increase connector density by 100% through the replacement of the coaxial cable connectors with multi-fibre connectors, more than halvingthe harness mass and volume linking the antennas to the…

The objective of the activity is to design, develop and test jamming mitigation strategies for NGSO broadband secure systems based on adaptive radio resource management algorithms.

The objective of this activity is to develop and test a software platform acting as an abstraction layer between the optical groundstation software client and the various software and hardware modules and their interfaces. Software implementation to be agnostic to operating systems and shall be based on object-oriented techniques to enable creation of a generic optical ground station model prior to programming. Testing shall and use commercial…

The objective of the activity is to design, develop and test payload technologies compliant with multi-beam receivers for satellite-based air traffic surveillance. Critical breadboarding will be carried out to demonstrate the concept suitable for use on small satellites in LEO or MEO. Targeted Improvements: 50% reduced payload power consumption, mass and volume compared to current technology.Increase the probability of message detection by a f…

The objective of this activity is to design and perform an in-orbit experiment investigating autonomous deployment and early operations for telecom constellation satellites. This includes the development of command and data-handling hardware as well as AI/ML based operational algorithms developed on-ground.Targeted Improvements: Increase of onboard autonomy by 50% (i.e. include the key number of autonomous functions), including attitude acquis…

The objective of the activity is to design a compact L-band RF front-end for telecom applications which is based on a GaN Low NoiseAmplifier (LNA). A breadboard of a GaN microwave monolithic integrated circuit will be developed and tested. The RF front-end including the filtering function shall be modelled.Targeted Improvements: up to 30% mass and volume saving of the RF front-end (LNA and filtering) and 20 dB improvement of the LNA dynamic ra…

The objective of this activity is to design, manufacture and test a partial RF breadboard of a transmit Ka-band, active phased array antenna and associated beamforming network for user links NGSO, exploiting irregular layouts for the radiating elements and beamforming networks.Targeted Improvements: In comparison to a standard, fully populated array:- 25% reduction in the number of active controls,- 5% increase in the DC to RF power efficiency…

The objective of the activity is to design, manufacture and test surface mount chip inductors enabling low voltage (down to 0.8 V range) stability, fast transient response, high-speed switching capability and efficient power conversion of point of load(POL) converters, as needed for next generation digital integrated circuits in telecommunication satellites.Targeted Improvements:- Enablinga European source.- 20% mass and volume reduction and 2…

The objectives of the activity are to identify the needs and requirements for new security assessment capabilities for satcom systems and their components, define related architectural solutions and develop prototypes of the main components of these capabilities.Targeted Improvements: Enabling testing, verification and validation of advanced technologies in the domain of cybersecurity, modern telecom and quantum security (Quantum Key Distribut…

The objective of the activity is to develop rapid and flexible advanced manufacturing techniques, with a full digital workflow, forhigh volume production of complex-shaped composite reflector antennas from 1 to 3.5 metres in diameter.Targeted Improvements:Reduction in composite reflector manufacturing time by a factor of five in comparison to standard metallic mould processes.Description:Today, the manufacturing lead time of reflector antennas…

Development of tools and hardware and the execution of a measurement campaign for background light and atmosphere conditions for Quantum Key Distribution (QKD) at urban location (major cities and metropolitan areas) under ARTES 4.0 Space Systems for Safety and Security (4S) Strategic Programme Line. These measurement results are an important check point to validate the design of the SAGA system. The background light and atmosphere metrology ac…

The objective of the activity is to design, manufacture and test an electric thruster using Argon propellant, compatible with the long lifetime and high total impulse requirements of telecommunication satellites in GEO and for constellations.Targeted Improvements:- Novel capability to operate with Argon propellant not existing today.- Improved lifetime and Total Impulse per kW(N.s/kW) by a factor of 2.- Decreased complexity of the thruster arc…

This Call for Proposals covers the industry initiated activities for the four Programmes lines identified below:ARTES Core Competitiveness Generic ProgrammeLine- Component B: Competitiveness GrowthARTES Strategic Programme Line Space for 5G/6G and Sustainable Connectivity ARTES Strategic Programme Line Space Systems for Safety and Security (4S)ARTES Strategic Programme Line Optical and Quantum Communication - ScyLight. The participating state…

This Call for Proposals covers the industry initiated activities for the Civil Security for Space programme.

The Pioneer programme, implemented under the ARTES 4.0 Generic Programme Line "Partnership Projects", aims to supports the emergence of Space Mission Providers (SMPs), i.e. commercial entities interested in becoming one-stop-shop service providers for public and private customers. The Open Call for proposals is aimed to offer the opportunity for new companies from across all ESA member states to participate in the programme. It will…

The objective of this activity is to develop a testbed that allows the demonstration of vehicle-to-everything (V2X) 5G services viasatellite. Using existing satellite assets and on-ground antenna for mobile applications (not necessarily aesthetically attractive), the test bed shall address both forward and return link traffic, to support the definition of future V2X applications and associated technical enhancements. The set of services to be…

The objective of this activity is to develop and evaluate efficient digital beamforming algorithms and techniques that are compatible with non-uniform antenna arrays or non-uniform beam lattices. The developed techniques will be implemented and evaluated on a representative processor test bed. Targeted Improvements: 30 to 70% power reduction on the implementation of digital beamforming algorithms with non-uniform input/outputs with respect to…

The objective of this activity is to implement and test the signal processing portion of a 5G LEO satellite payload capable of handling several high throughput beams assuming an active antenna configuration. The demonstrator shall be based on a processor capable of controlling a reconfigurable beam-forming network (BFN) and performing signal (re-)generation andchannelisation of 5G waveforms. Targeted Improvements: Enable 5G regenerative payloa…

Objective: To develop a simulator of optical propagation based on a high-resolution numerical atmospheric simulator, to be used forthe long-term characterisation and the forecast of the signal scintillation and other propagation effects in the area around a ground terminal for Earth-Space optical communication system. Targeted Improvements: Breakthrough to achieve regional optical channel performance assessment; achieve high resolution channel…

The objective of this activity is to form a European consortium and to develop a solar array test approach as needed for the preparation of the ECSS E-20-08 handbook, in the case of a design or process change. The new test approach will be validated by Development Validation Testing (DVT) coupons. Targeted Improvements: Substantial reduction (50%) in the delta-qualification time of solar panels, which deviate slightly from existing qualified d…

The objective of the activity is to design, manufacture and test in orbit an inflatable drag device for de-orbiting small satellites from Low Earth Orbit (LEO). Performance data will be gathered (deployment imagery and positional telemetry) in a fully representative space environment (including drag effects) that would not be possible to simulate or test on ground. Targeted Improvements:Reduce de-orbit time by a factor of 5 (for altitudes of 4…

The objective of this activity is to design, develop and test a breadboard of a highly integrated Q-V band beam forming network forflexible on-board feeder link active antennas. Targeted Improvements: Enabling a European source for Q-V band beamforming for feeder links. Description: Feeder links in next generation Very High Throughput Satellites (VHTS) rely on a full RF chain in Q-V band. Today, mechanically steerable multi-feed antenna archit…