European Space Agency


The purpose of FOLC project was to manufacture and test in laboratory environment a breadboard of the optical communication chain including:

  • The optical transmitter (Tx) with its own electronics. The key enabling technologies of this piece of equipment are the distributed feedback (DFB) lasers and Mach-Zehnder modulators (MZM).
  • The optical receiver (Rx) with its own electronics. The key enabling technologies of this piece of equipment are the low noise optical amplifier (LNOA) with rare earths-doped fiber, fast photodiodes and Mach-Zehnder delay line interferometer (MZDI).
  • The optical booster, also known as high power optical amplifier (HPOA), with its own electronics. The key enabling technologies of this piece of equipment are the rare earths-doped fiber and high power pumping diodes.

Those elements have been first implemented and tested separately by the partners of the consortium (iXBlue and CILAS) and then combined with each other on a global system test bench (STB) to assess overall performance of the optical communication chain.

Global picture of the fibered part of the system test bench


One of the main goals of the System Test Bed measurements was to assess the sensitivity of the optical link under several configurations (data rate, modulation, channel impairments, etc…). The sensitivity is defined as the mean received optical power (ROP) per channel (i.e. per wavelength) required to achieve a target BER. The ROP is measured right at the input of the receiver part of the transceiver.

The measurement of various configurations allows selecting the best solution at system level for the product development phase in terms of complexity / cost vs performances.


The FOLC communication chain was designed using COTS components that were selected for their a priori compatibility with space environment. It also uses simple and robust modulation formats (OOK/DPSK) and the fiber standard 1550nm wavelength, hence offering a very cost effective solution compatible with New Space / Mega-constellation requirements.

The FOLC communication chain is using WDM (Wavelength-Division Multiplexing) technology with a dozen wavelengths, so it is one order of magnitude more capacitive than current single wavelength free space optical communication systems.

Furthermore the FOLC design offers also a huge potential for capacity growth: Initially designed for digital transparent feeder link with four time the generation one capacity of OneWeB Ka feeder links, it can also be used in the future with a regenerative payload offering then more than 20 time the current feeder capacity.


The digital processing unit (DPU) generates the data and can processes them for adding a forward error code (FEC) in order to protect the optical transmission against the optical channel effects. DPU is also capable to analyse the data after the transmission and compute the bit error rate (BER) for determining the quality of the link.

Transceiver is composed of the electro-optic emitter (Tx) and the opto-electronic receiver (Rx). At the emitter, the laser slice includes 12 DFB lasers to generate 7 wavelengths for forward link and 5 wavelengths for return link. OOK and DPSK modulations are generated with the same MZM but with different RF drivers and bias voltages.

At the receiver, a first slice includes LNOA and DEMUX for red and blue bands. Another slice is dedicated to the opto-electrical converter. The transceiver has been designed to be versatile so as to test multiple configurations (data rate & modulation).

The booster is a 5 W polarization maintaining Erbium-Ytterbium doped fiber amplifier (EYDFA) designed to operate on 1556-1563 nm band. Double-amplification stage architecture has been chosen in order to offer flexibility over flatness setting. It has been developed with rad-hard doped fibers developed by iXBlue.

System Architecture

The primary use-case targeted by FOLC project was to propose a capacity ramp up based on optical feeder for the LEO OneWeb constellation. The idea was to operate a hybrid optical/RF architecture at the system level: each optical satellite is interleaved between two RF satellites. One optical and one RF satellite are therefore always in visibility of each user. The purpose of the optical satellite is to provide improved capacity if weather allows it, whereas the RF satellite ensures the system availability. No optical handover is considered in this approach, the continuity of the service being ensured by the RF satellite.

In terms of platform capacity, it is possible to increase the frequency reuse in order to quadruple the user link capacity. Thus, the proposed optical feeder has to carry 16 GHz-bandwidth in forward (from gateway to users) and 8 GHz-bandwidth in return (from users to gateway).


System architecture


In order to establish the input document, ie the communication items performances document, a prior work has been realized by Airbus (based on internal funding) to establish the communication chain requirements and its associated design justifications.

During FOLC project, the Rx chain, the Tx chain and the optical booster breadboards were manufactured, Integrated And Tested on partners laboratories.

Each element was then integrated and validated on the Airbus DS System Test Bed (STB). Finally, the end to end communication chain was tested, including the atmospheric emulator, the Acquisition & Rear Tracking System and the Fibre Injection Mechanism.

Current status

The FOLC project is now finished, the final review was successfully held with ESA in July 2019. All the components of the FOLC communication chain have been manufactured and tested individually, then altogether on the System Test Bed in various configurations of data rates (10Gbps/25Gbps) and modulations (OOK/DPSK).

All the test results and lessons learned have been used to define the optimum product baseline for the product development phase, named FOLC 2, to follow this technology activity.

Status date

Wednesday, November 20, 2019 - 12:50