European Space Agency

LiveSatPreDem Live Satellite Demonstration of Advanced Interference Management Techniques

AddToAny

Objectives

The objective of this study is to implement and demonstrate, through live demonstration over a real GEO satellite, Multi-User Multiple Input Single Output (MU-MISO) digital signal processing techniques, namely precoding, in the Forward (FWD) link of a multi-beam satellite system operating in full frequency reuse (FFR). While standard technologies, as for DVB-S2, operate using an interference avoidance approach through a proper re-use of the spectrum amongst beams, more recent paradigms have been proposed which go in the opposite direction through the management of the interference amongst beams. The objective is clearly to maximize the use of the available spectrum which represents a limited resource of the system.

The study shall increase the maturity of the technology to a TRL 5. To this aim, the demonstrator shall implement all the functionalities of a precoding-based system: synchronization and collection of the estimated Channel State Information (CSI), precoding-specific smart user-scheduling techniques and Modulation and Coding (Modcod) allocation, computationally-efficient calculation of the precoder and application of the resulting precoder to the vectors of symbol streams to be transmitted by the GW. The benchmark for this study is an equivalent system operating in a colour reuse scheme that basically entails an interference avoidance approach.

Challenges

The main challenge of the project is the reduced cost per delivered bit over the satellite by researching and implementing the new technologies. By upgrading the satellite modems and making minor adaptations to satellite payloads, the technology can provide much faster and more accessible broadband service. This improvement can be used to increase the turnover of satellite operators while providing superior quality of service to the users. It should be also noted that the technology allows the satellite operators to dynamically allocate the broadband capacity to the areas where it is needed the most, enabling a higher level of adaptability in terms of space assets. Satellite service coverage can be a subject of economic demand in developing countries and act as emergency services to backup areas with high-risk of natural disasters, where local telecommunication services might be temporally disabled. In the current phase the team is in the process of bringing the technology to TRL 5. 

Benefits

The study has led to the design and development of new technologies and products in the area of satellite communications (satcom). SIGCOM in collaboration with SES has defined the technical requirements for the satellite communication payloads, needed to support the switch from classic 4 colour reuse scheme to full frequency reuse through precoding technology. These are already taken into account for the SES missions to be flown in the near future. SIGCOM has implemented the main algorithms into model prototypes which have been used to demonstrate the increased satellite channel capacity in the lab and enable to prepare a live demonstration over satellite.

Features

The product features many technologies which previously have never been used in SATCOMs. The precoding enabling technology is the DVB-S2X superframe standard, defined within ETSI and DVB organizations. By using the superframe transmission UTs can estimate CSI to evaluate inter-beam interference, which a gateway can later precompensate by using Zero-Forcing or  minimum mean squared error (MMSE) precoding with advanced per-antenna power constraints (PACs) for the improved performance. The precoding technology is supported by an advanced user scheduling in the SATCOM network. These two techniques allow SATCOM to efficiently reuse available frequency channels and to operate in a broadband regime. It means that the channel capacity through a network of satellites can be flexibly managed and reallocated accordingly to the constantly varying demands of the on ground terminals within the service coverage. The project features an in-lab demonstration of the aforementioned technologies, emulating a full chain from the gateway with 16 beams to the 16 UTs. Additionally, a live demonstration is planned for over satellite demonstration for 2 beams and 2 UTs. 

System Architecture

The figure below shows a general block diagram of the demonstrator.

The main functional blocks of the Precoding demonstrator are: a precoding enabled gateway, a satellite MIMO channel emulator and a set of user terminal receivers.

The proposed infrastructure is based on Software Defined radio platform by National Instruments and it is depicted in the following figures for both the GW and the UT.

Plan

To accomplish the project’s objective, 5 main tasks have been identified:

System, scenarios and techniques definition: the main aim of this task is to define use case scenarios.

Detailed design of GW and UT prototypes: the selected algorithms will be designed taking into account the chosen Software Defined Radio based platform.

SDR-based development of GW and UT prototypes: the prototypes of the GW and the UT needed to enable precoding will be implemented.

In-lab testing and validation of prototypes: a validation phase is required to test the functionalities of the novel.

Execution of the demonstrator over Satellite.

Current status

The first two tasks have been successful completed. The development of the GW and UT prototypes are currently on going and they will be completed in the first half of 2020. The Execution of the demonstration over the satellite is scheduled in summer 2020. 

Contacts

ESA Contacts

Status date

Thursday, October 24, 2019 - 06:18