The objective of the activity is to develop and test a computer-assisted approach for in-situ operational health monitoring and anomaly detection for mission-critical platform mechanisms (e.g., reaction wheels, solar array drive mechanisms, antenna pointing mechanisms, laser communication terminals, etc.) in telecommunication spacecraft. Rather than relying on telemetry data, this activity will develop an approach using the full signal and sen…

The objective is to develop a multi-model informed predictive tool of atmospheric parameter variability for mission design and operation.Targeted Improvements:- Enabling a new European tool allowing prediction of atmospheric conditions (e.g., density, composition, radiation) over time, including local state and total dose.- To reduce initial mission design margins hence avoiding overdesign.Description: The recent loss of several communication…

The objective of this activity is to develop, design, manufacture and test a battery with European Commercial Off The Shelf (COTS) battery cells for telecom space applications. Targeted Improvements:- At least 20% mass reduction at battery level;- Enabling European independency and continuity of technology sourcing. Description: Current state-of-the-art space Li-Ion cell technology can provide around 180 Wh/kg, while Li-Ion COTS cell technolog…

The objective of this activity is to proof that a standardised existing solution such as NB-IOT can be used for satellite-to-satellite low data rate communications. Targeted Improvements: Introduce world's first standardised intersatellite data relay solution based on 3GPP NTN standards, opening up a new market for new companies and telecom operators toprovide data solutions to Earth Observation missions via intersatellite data relay. Des…

The objective of the activity is to design, develop and test key building blocks for software defined payloads using a model-based approach. At least six building blocks implementing telecommunication application functions (e.g. signal processing, signal filtering, encryption, compression, etc.) shall be developed. At least two use case applications shall be developed, and the performance tested to validate the approach.Targeted Improvements:…

Study, design and validate a secure two-way ranging protocol relying on 5G Non-Terrestrial Network (NTN) in LEO.Targeted Improvements:Enable secure two-way ranging via future LEO 5G satcom services for target applications such as IoT sensors.Description:All GNSS systems are principally based on one-way ranging and as such they are fundamentally vulnerable to spoofing and/or meaconing attacks, even in the presence of GNSS security mechanisms su…

Upon Delegation Request (*) The objective of the activity is to develop and validate a mobile terminal antenna that supports satellite connectivity and terrestrial 5G. A prototype of the antenna will be manufactured and tested in a laboratory environment. Targeted Improvements: Terminal size, weight and power reduction (30 to 50%) achieved by integrating 5G satellite and terrestrial antenna systems.The integration of satellite communications…

ESA will support an initiative to define a future amateur satellite payload in geostationary orbit. ESA proposes that this activitywill be implemented by a combination of collaborative internal, industrial, and amateur efforts, all within the financial envelope as indicated. The activity shall consolidate requirements from the amateur and commercial satellite industry, trade-off several payload options, address the future user segment, develop…

The objective is to carry out an assessment of the NTN deployment of the 5G NR air interface in TDD mode and identification of technology gaps and constraints. Develop a software testbed implementing and testing the scenario.Improve the overall spectrum utilisation by up to 50% when using Time Division Duplex communication as per 3GPP standard.The 3GPP has specified for Non-Terrestrial Networks (NTN) the n255 and n256 bands, both operating in…

The objective of this activity is to design, develop and test a high-power Tx/Rx W-band diplexer for ground terminals.Targeted Improvements:Enabling technology for ground stations W-band gateway links with high power handling and low PIM.Description:The useof the available spectrum in W-band (71-76 GHz for downlink and 81-86 GHz for uplink) is attractive to satcom systems asit could beadopted in the gateway of Very High Throughput Satellites (…

The objective of the activity is to develop technology to prevent non authorised usage of satellite communication bandwidth throughthe implementation and enforcement of on-board authentication protocols. During this activity+ a breadboard that implements such protocol will be developed in a laboratory environment.

The objective of the activity is to develop and test a demonstrator of a frequency coordination system that manages access to spectrum among different non-geostationary satellite systems. The concept will be implemented and tested as a real-time emulator to be developed as part of the activity.Targeted improvements: Improving the achievable throughput by 50% with respect to partitioning the frequency band.Description:The increasing number of c…

The objective of the activity is to study and define a technical and deployment roadmap for edge-computing-enabled Beyond 5G (B5G) and 6G space infrastructure. Use cases of Non-Terrestrial Networks (NTN) edge computing will be selected and a corresponding demonstrator will be breadboarded and tested.Targeted Improvements: Enabling edge-computing-capable space infrastructure.Description:The Beyond 5G (B5G)/towards 6G roadmap is rapidly evolving…

Objective:The objective of this activity is to develop and test a power efficient 5G User Plane Function (UPF) prototype, implemented onto space enabled hardware platforms. The development will leverage concrete laboratory results of various RAN splits and compensate for their impact on the 5G protocol stack. Finally, system integration with a ground segment control plane will be tested, over emulated LEO constellationsTargeted Improvements:-…

Objective: The objective of the activity is to develop low noise and small footprint semiconductor laser diodes at 1064nm compatible with WDM operation and the associated low-power consumption driving electronics. The activity shall also investigate technologicaloptions to further reduce the footprint and the power consumption of the low-power section of an optical transmitter at 1064nm (e.g., integration of multiple lasers diodes, optical mod…

The objective of the activity is to develop and test a reprogrammable testbed in space to permit the experimentation of Beyond 5G (B5G) satellite features and capabilities and enable technology verification and demonstration; rapid validation of end-to-end solutions and services, following the principles of continuous development/continuous integration. B5G satellitefeatures will be implemented in the testbed as part of the activity to demonst…

The objective is to develop and test a direct chip to baseplate thermal concept based on Pulsating Heat Pipes that reduces design complexity and yet widens the operating temperature range and thermal transport performance.Targeted Improvements: - Improved heattransfer performance to at least 60 watts per chip.- Operation in adverse vertical gravity and below -40C- Reduced manufacturing complexity in chip to unit baseplate thermal transport com…

This Call for Proposals covers the industry initiated activities for the four Programmes lines identified below:ARTES Core Competitiveness Generic ProgrammeLine- Component B: Competitiveness GrowthARTES Strategic Programme Line Space for 5G/6G and Sustainable Connectivity ARTES Strategic Programme Line Space Systems for Safety and Security (4S) ARTES Strategic Programme Line Optical and Quantum Communication - ScyLight. The participating stat…

The objective of the activity is to develop a breadboard of a flexible pivot a with large range of rotation angle (goal90 degrees),which features a hollow inner shaft to route an optical beam for optical communications or cables/waveguide in other applications.Targeted Improvements:One order of magnitude improvement in operating lifetime of coarse pointing mechanisms in optical communication terminals compared to ball bearing mechanisms, and a…

The objective of the activity is to design, develop and validate an on-board software relying on Artificial Intelligence that autonomously detect, isolate and recover failures at spacecraft level and that performs resource optimisation at constellation level to recover and improve the overall availability of the service.Targeted Improvements: - Enabling autonomous FDIR management at the level of constellations.- Enabling autonomous performance…

Objective: The objective is to develop a high-power and high-efficient optical booster amplifier, compatible with WDM operation at 1064nm wavelength range. Two versions, with different output optical power and wall-plug efficiency requirements, are to be developed to address operation under space and ground environmental conditions. Targeted Improvements:Strategic component not available inESA's Member States nor in Cooperating/Associated…

The objective of this activity is to design, implement and test active queuing management and packet scheduling techniques at the user terminals and ground equipment, so that the SATCOM network continues to provide seamlessly an acceptable throughput and latency to users under any congestion situation.Targeted Improvements:- Enabling a responsive and fair SATCOM network in any traffic andresources availability situation.- Keeping the addition…

Objective:The objective of the activity is to develop a space-based point to multipoint optical terminal.Targeted Improvements:The MOHU would reduce the number of required Optical Head Units by a factor greater than 2. The MOHU should target a mass and sizeless than x1.5 the mass and size of the combined individual Optical Head Units.Description:Today the implementation of simultaneous optical space to ground links (Optical Feeder Links) requi…

The objectives of this activity are to design, develop and test techniques enabling integration of existing and new VPN solutions suitable for space networks (LEO constellation, MEO constellation or GEO) for the purpose of comparison, performance evaluation and optimisation, while maintaining compatibility with terrestrial networks.

The objective of the activity is to design, manufacture and test a compact transmit-receive diplexer engineering model with high isolation, low loss and power handling as required for full duplex VHF data exchange payloads.Targeted Improvements: Enabling technology for full duplex VHF data exchange system (VDES) payloads on small satellite platforms.Description: The World Radiocommunication Conference in 2019 allocated maritime VHF frequencies…