For planet earth and beyond
Funding
This page displays the ARTES Invitation To Tenders (ITTs) which are published on ESA-STAR. If you are looking for a specific element select from the list provided and click on the Apply button to start the search and display the results.
Funding of the individual Prime or subcontractors, for ARTES Core Competitiveness and ARTES Applications activities, is subject to authorisation of the required ARTES budget by the related National Delegations. Therefore, bidding teams are requested to inform their National Delegation(s) of their intention to participate in funded activities already before submitting a proposal.
The official information platform for providing potential bidders all the relevant documentation and details concerning the intended and issued Invitations To Tender (ITTs) for Open Competitions and Direct Negotiations is ESA-STAR - managed and operated by the ESA Procurement Department.
BROADBAND TUNEABLE KA-BAND FREQUENCY MULTIPLEXERS (ARTES AT 5C.430) (ON DELEGATION REQUEST)
The objective of this activity is to design, manufacture and test two breadboards corresponding to a reconfigurable 4-channel 30 GHz low power Combiner Frequency Multiplexer (CMUX) and a 4-channel 20 GHz low power frequency Demultiplexer (DMUX). Targeted Improvements: Replacement of conventional fixed-bandwidth CMUX and DMUX equipment with a tuneable solution capable of supporting agile traffic management.Description: Current broadband satelli…
MACHINE LEARNING TECHNIQUES FOR DATA RATE REDUCTION (ARTES AT 7B.079)
The objective of this activity is to design, implement and test Machine Learning (ML) and Artificial Intelligence (AI) based data rate reduction techniques for ground terminals. A testbed will be developed to assess performance savings in terms of throughput, complexity and power consumption.Targeted Improvements: Decrease the transmitted data rate by at least 40% for specific applicationsDescription: Many types of data transmissions and recep…
ASIC/FPGA WITH 112 GBPS OPTICAL I/OS (ARTES 4.0 SL SPL 5C.480)
The objective of this activity is to develop the technology step needed to enable the use of optical interconnects at speeds of up to 112 Gbps. This should be demonstrated through testing of an integrated digital signal functions (ASIC and FPGAs) with the developed electro-optic transceiver photonic integrated circuits that form the optical I/Os to replace traditional electrical I/O.Targeted Improvements:Increase the data rate throughput up to…
NUTATION BASED FINE TRACKING SYSTEM FOR SPACE OPTICAL COMMUNICATION TERMINALS (ARTES 4.0 SL SPL 5F.049)
Objective: The objective of the activity is to develop a fine tracking system with reduced complexity and size. The fine tracking of optical communication terminals shall be based on Rx-fibre or Rxbeam nutation for probing the point spread function at the focal plane and will replace the need for a tracking sensor. Targeted Improvements: Reduce the size weight, power and cost of space opticalcommunication terminals by 30%. Description: Nutatio…
SPATIALLY COMBINED 40 W - 60 W Q-BAND SOLID STATE POWER AMPLIFIER (ARTES 4.0 AT 5C.494)
The objective of this activity is to develop, manufacture and test a highly efficient Q-band spatial power divider and combiner forapplication in Q-band Solid State Power Amplifiers (SSPA). Experimental performance verification shall be carried out on a 40 - 60 W (nominal operating point) Q-band SSPA breadboard. Targeted Improvements: Improved power added efficiency of 5 - 10% of Q-band SSPAs in comparison to the state of the art. Description:…
AUTOMOTIVE S-BAND ANTENNA FOR SATELLITE IOT AND 5G TERRESTRIAL COMMUNICATIONS (ARTES SPL 5G 7C.062) (UPON DELEGATION REQUEST)
Upon Delegation Request (*) The objective of the activity is to develop, manufacture and test an integrated automotive S-band antenna that combines satellite IoT and 5G terrestrial communications. Targeted Improvements: Reduction of antenna form factor from a protruding antenna (e.g. shark fin shape) to planar antenna fully integrated in the car roof. Bandwidth increase from 30 to 90 MHz for satellite and 5G communications. Description: The In…
POWER MODULE FOR AUTONOMOUS SATELLITES (ARTES AT 4F.095)
The objective of the activity is to design, manufacture and test a power module that will be integrated in an autonomous spacecraftarchitecture.Targeted Improvements:Increase the level of onboard autonomy by 50% at overall platform level.Description: Current satellite operations require human intervention from ground, resulting in considerable inefficiencies and dependencies on communication window frequency, latency, and available resources,…
RECONFIGURABLE ANTENNAS FOR MOBILE TERMINALS BASED ON ACTIVE ACTUATORS (ARTES 4.0 AT 7C.080)
The objective of the activity is to design, manufacture and test a Ku- or Ka-band transmit or receive antenna based on reconfigurable actuators for large mobile terminals connected to Low Earth Orbit (LEO) satellites.Targeted Improvements:Enabling reconfigurable terminal antennas with scan angles up to 50-60 degrees exploiting active actuators like pin or varactor diodes, MEMS and other possible actuators with an overall antenna thickness belo…
BUILDING BLOCKS FOR DIGITAL TWIN OF ATTITUDE AND ORBIT CONTROL SYSTEM EQUIPMENTS (ARTES 4.0 AT 4C.068)
The objective of the activity is to develop and test a cyber-physical modelling for a Digital Twin of AOCS sensors. A multi-physic model-based Digital Twin can be used to perform on-board self-calibration employing data-driven techniques and simplify the ground verification of new satellite platforms by having a direct dispersion of the different parameters, hence reducing complex Monte Carlodispersions. Targeted Improvements: Enabling on-boar…
IN-ORBIT EXPERIMENT OF A VLEO SATELLITE TO ENABLE PRECISE ORBITAL MODELLING AND SYSTEM SIZING (ARTES AT 3E.026) (ON DELEGATION REQUEST)
The objective of the activity is to develop high fidelity models to allow the mission design of satcom constellations in VLEO. An in-orbit experiment will be designed and manufactured to measure key geographically and time dependent atmospheric parameters (density, radiation, ionospheric, chemical composition etc..) as well as satellite flight parameters (including drag, solar cells efficiency, etc..). These measurements will enable the precis…
TRANSMIT-RECEIVE BEAMFORMING AND FRONT-END CIRCUITS AND CHIPS FOR Q-V BAND SATCOM TERMINALS (ARTES AT 7C.097)
Objectives: The objective of this activity is to design, manufacture and test integrated circuits of the critical beamforming functions in silicon technologies, enabling Q/V-band electronically steerable antenna for satcom terminals. As a minimum, two types of integrated circuits will be developed. One chip shall be a multichannel transmit-receive beamforming radio frequency integrated circuit (RFIC) and the second chip shall be a multichannel…
ARTES 4.0 SPL OPTICAL COMMUNICATION - SCYLIGHT: INTEGRATED OPTICAL INTERFACES FOR RF PHASED ARRAY ANTENNAS (5F.013 / SL.030)
Objective:The objective of the activity is to analyse and demonstrate the benefits of replacing coaxial cables/waveguides with fibre optics in large RF phased array antennas. The activity shall identify the best technologies to be employed and it will design, manufacture and test 2 breadboard demonstrators covering both analogue and digital transmission.Targeted Improvements:Order of magnitude mass and volume reduction by substituting the pass…
500 AMPERE CLASS POWER UNIT FOR ONBOARD PAYLOAD SIGNAL PROCESSING HARDWARE IN COMMUNICATION SATELLITES (ARTES AT 5C.516)
The objective of this activity is to design, manufacture and test a 500A class power unit capable of supplying DC power for both large on-board and AI processors for use in communication satellites.Targeted Improvements: Improved current supply capability of voltage regulators by a factor of ten enabling the use of high performance AI processors (GPUs and TPUs) in future telecom satellites.Description: Artificial Intelligence (AI) processors,…
ARTIFICIAL INTELLIGENCE/MACHINE LEARNING FRONT-END MODULE FOR SATCOM 5G/6G INTEGRATED ACCESS-BACKHAUL TRANSCEIVERS (ARTES 4.0 SPL 5G/6G 6B.119)
The objective of the activity is to develop, implement and test a breadboard of a digital transceiver front-end capable of switching between access and backhaul modes of operation for integrated satcom-terrestrial 5G/6G networks. The transceiver core shall be supported by an AI/ML engine implemented for a set of commercially available hardware and software platforms. The activity shall also provide the testbed to test the AI/ML-based transceiv…
SPARSE TRANSMIT KA-BAND ACTIVE PHASED ARRAYS FOR GROUND TERMINALS CONNECTED WITH SATELLITES IN DIFFERENT ORBITS (ARTES AT 7A.077)
The objective of this activity is to develop and test a Ka-band sparse active transmit antenna breadboard and associated beamforming network for ground terminals to be connected with satellites in orbits ranging from geostationary orbits to low earth orbit orbits. Targeted Improvements: - 25% reduction in the number of active controls.- 5% increase in the DC-to-RF power efficiency at antenna level, due to the reduced exploitation of amplitude…
QUANTUM RESISTANT KEY EXCHANGE AND AUTHENTICATION MECHANISM FOR 5G NON-TERRESTRIAL NETWORKS (ARTES 4.0 SPL 4S 3D.026)
The objective of this activity is to identify, analyse and test post quantum cryptographic solutions that are suitable for 5G Non-Terrestrial Network (NTN) key exchange and authentication. The activity will develop a testbed to implement and test identified post quantum cryptographic solutions.
ARTES 4.0 SPL OPTICAL COMMUNICATION - SCYLIGHT: RF AND OPTICAL HYBRID GATEWAY ANTENNA (6C.002/SL.024)(ON DELEGATION REQUEST) - EXPRO PLUS
Objective:The objective of this activity is to investigate a telecom gateway antenna able to work simultaneously in both the RF (Ka- Q/V-Band) and optical wavelengths.Targeted Improvements:This product is currently not available and it would allow a phased migration from RF communications to optical communications.Description:There is a clear trend in the need to increase bandwidth in order to increase the data rate, within the telecommunicat…
HIGHLY EFFICIENT 20 W S-BAND AMPLIFIER FOR 5G-CONNECTED CARS (ARTES 4.0 SPL 5G/6G 7C.082)
The objective of the activity is to design, manufacture and test a highly efficient 20 W S-band Power Amplifier.Targeted Improvements:Efficiency higher than 70% - enabling technology for S-Band automotive applications.Description:Recent studies have shown the potential of satellite communications for 5G-connected cars. Although various frequency bands may be envisaged, the S-band can offer a simple systems architecture as well as a satisfactor…
SPECTRUM SHARING TECHNIQUES FOR BEYOND 5G (B5G) AND 6G 3D NETWORKS (ARTES 4.0 SPL 5G/6G 3A.185)
The objective of the activity is to investigate and develop spectrum reuse and sharing techniques for integrated NTN-TN 3D networksthat allow them to pool, share, and rapidly reallocate spectrum on demand among their heterogeneous components/segments. The techniques will be prototyped in a testbed to be implemented as part of the activity.Targeted improvements:Enabling spectrum reuse and sharing in integrated NTN-NT 3D networks.Description:Spe…
ION THRUSTER GRID IMPEDANCE MEASUREMENT DEVICE FOR IN-FLIGHT THRUSTER HEALTH MONITORING (ARTES AT 4B.182)
The objective of this activity is to extend the thruster lifetime and optimise the operating point of the thruster and to develop afinite element model of the grids system together with the plasma in between to allow health checks.Targeted Improvements:- 20%increase in thruster lifetime.- 20% decrease of grid thruster failure probability (erosion).Description: Telecom platforms couldbenefit from gridded ion thrusters in the near future, but c…
PIONEER PARTNERSHIP PROJECTS (PIONEER 4.0) - OPEN CALL FOR PROPOSAL
The Pioneer programme, implemented under the ARTES 4.0 Generic Programme Line "Partnership Projects", aims to supports the emergence of Space Mission Providers (SMPs), i.e. commercial entities interested in becoming one-stop-shop service providers for public and private customers. The Open Call for proposals is aimed to offer the opportunity for new companies from across all ESA member statesto participate in the programme. It will b…
HIGHLY INTEGRATED TRANSMIT AND RECEIVE DIRECT RADIATING ANTENNA ARRAY BASED ON MM-WAVE SILICON TECHNOLOGIES AND PACKAGING (ARTES AT 5B.241)
The objective of the activity is to develop a highly integrated, scalable Ku or Ka-band TX/RX direct radiating array, for versatileconnectivity missions in low earth orbit. Critical breadboarding will be carried out, levering the advances in Mm-wave silicon technologies and advanced packaging techniques to achieve a high degree of integration. Targeted Improvements: Enabling highly integrated combined transmit and receive active antenna with a…
ARTES 4.0 SPL OPTICAL COMMUNICATION - SCYLIGHT : DEMONSTRATION OF RELIABLE HIGH DATA RATE OPTICAL LINKS UNDER STRONG ATMOSPHERIC TURBULENCE CONDITIONS (3B.042 / SL.015)
Objective:The objective of this activity is to demonstrate reliable high data rate optical transmission through the atmosphere (>100Gbps) in a scenario representative (in terms of link attenuation and optical turbulence) of an optical link between a telecom satellite and an Optical Ground Station for elevation angles down to 5deg. Targeted Improvements:Improve the service quality and availability of high data rate optical links through the…
SINGLE-PIECE-PART W-BAND PHASED ARRAY ANTENNA INCLUDING THE PASSIVE RF FRONT-END (ARTES AT 5B.239)
The objective of this activity is to design, manufacture and test a W-band/E-band phased array antenna including the passive RF front-end taking advantage of additive and hybrid manufacturing techniques in order to reduce its complexity and mass compared to conventional subtractive techniquesTargeted Improvements: 30% mass reduction, removing screws and assembly interfaces.Description: With the multiplication of broadband communication satelli…
KA-BAND RADIO FREQUENCY FRONT-END RESISTANT TO INTENTIONAL INTERFERENCE FOR SECURE TTC (ARTES 4.0 4S SPL 4G.041)
The objective of the activity is to design, manufacture and test a Scaled Engineering Model of rugged Ka-band RF front-end for secure TTC applications that will enable technologies for mitigation of intentional interference. Targeted Improvements: Ability to operate under severe Radio Frequency Interference. Description: TTC is a key equipment for all satellites since it provides the umbilical cord to the control station(s). It has to operate…