The objective of the activity is to develop and test a multifunctional hinge technology to accommodate a large multi panel active antenna array on a spacecraft platform, with integrated sensing to avoid adverse local deflections due to spacecraft dynamics.Targeted Improvements:Enabling technology for very large active antennas with disperse panels to be accommodated on a spacecraft platformfor future 5G/6G (direct to handheld) satellitesDescri…

Objectives: The objective of this activity is to design, manufacture and test integrated circuits of the critical beamforming functions in silicon technologies, enabling Q/V-band electronically steerable antenna for satcom terminals. As a minimum, two types of integrated circuits will be developed. One chip shall be a multichannel transmit-receive beamforming radio frequency integrated circuit (RFIC) and the second chip shall be a multichannel…

Objective: The objective of the activity is to develop and test a system simulator testbed capable of modelling and assessing the performance of communication satellite constellations operating in Very Low Earth Orbit (VLEO). This includes the assessment of the emerging waveforms (5G NTN, European Protected Waveform).Targeted Improvements: Enable the design and assess the constellation system performance of communication satellites operating i…

Objective:The key objective of this activity will be the investigation of the demise behaviour of different optical communicationterminals for current and future applications on-board satcom platforms in LEO (e.g. future constellations) and therefore the development of breadboard of the design for demise solutions and technologies identified to reduce the on-ground casualty risks associated with these elements.Targeted Improvements:Reduce by a…

Objective:The objective of this activity is to investigate a telecom gateway antenna able to work simultaneously in both the RF (Ka- Q/V-Band) and optical wavelengths.Targeted Improvements:This product is currently not available and it would allow a phased migration from RF communications to optical communications.Description:There is a clear trend in the need to increase bandwidth in order to increase the data rate, within the telecommunicat…

The objective of the activity is to investigate and develop spectrum reuse and sharing techniques for integrated NTN-TN 3D networksthat allow them to pool, share, and rapidly reallocate spectrum on demand among their heterogeneous components/segments. The techniques will be prototyped in a testbed to be implemented as part of the activity.Targeted improvements:Enabling spectrum reuse and sharing in integrated NTN-NT 3D networks.Description:Spe…

The objective of the activity is to select an off the shelf European slipring technology for terrestrial applications and demonstrate its suitability for Satcom applicationTargeted Improvements: Improving by 20% of power density, lifetime, mass, volume, and lead time.Description: Solar Array Drive Mechanism (SADM) require complex slip-ring technology often leading to long delivery times. However, slipring technologies for terrestrial applicati…

The objective is to develop and test a Ku or Ka band transparent phased array antenna to provide broadband connectivity on board cars. Targeted Improvements: Develop a new class of phased array antennas for cars able to guarantee a seamless broadband connectivitywith LEO satellites. Description: There is today a significant interest to provide broadband connectivity to cars. This request is associated to the need to guarantee emergency service…

The Pioneer programme, implemented under the ARTES 4.0 Generic Programme Line "Partnership Projects", aims to supports the emergence of Space Mission Providers (SMPs), i.e. commercial entities interested in becoming one-stop-shop service providers for public and private customers. The Open Call for proposals is aimed to offer the opportunity for new companies from across all ESA member statesto participate in the programme. It will b…

The objective of this activity is to identify, analyse and test post quantum cryptographic solutions that are suitable for 5G Non-Terrestrial Network (NTN) key exchange and authentication. The activity will develop a testbed to implement and test identified post quantum cryptographic solutions.

The objective of the activity is to de-risk software mitigation techniques for radiation effects on a family of high-performance processors embedded in System on Chip (SoC) components. The activity will identify, on one or more processors of interest for the industry, radiation-induced failure modes and will implement appropriate software mitigation techniques with reuse or development of small FPGA IPs if needed. Targeted Improvements: Enable…

The objective of the activity is to characterise narrow attenuation lines (due to absorption or scattering) in the optical C-band (and ideally L-band) and to evaluate their effect on the communication performance of terabit-per-second feeder links. The activity will develop a testbed to perform measurements and to compare them against existing models. Targeted Improvements: 100% reliability improvement of terabit per second optical communicati…

Objective:The objective of this activity is to demonstrate reliable high data rate optical transmission through the atmosphere (>100Gbps) in a scenario representative (in terms of link attenuation and optical turbulence) of an optical link between a telecom satellite and an Optical Ground Station for elevation angles down to 5deg. Targeted Improvements:Improve the service quality and availability of high data rate optical links through the…

The objective of the activity is to design, manufacture and test a Scaled Engineering Model of rugged Ka-band RF front-end for secure TTC applications that will enable technologies for mitigation of intentional interference. Targeted Improvements: Ability to operate under severe Radio Frequency Interference. Description: TTC is a key equipment for all satellites since it provides the umbilical cord to the control station(s). It has to operate…

The objective of the activity is to design, manufacture and test a thruster switching unit facilitating the connection of multiple electric propulsion thrusters to one or more power processing units for redundancy or configuration purposes optimising the system architecture.Targeted Improvements: - Improved efficiency (10% increase with respect to solid state solution).- Increased reliability with respect to a relay-based solution.- Reduced le…

The objective of the activity is to develop an elegant breadboard of a high-power optical amplifier operating in L-band.TargetedImprovements:Enable access to spectrum in the optical transmission window(s) beyond the conventional C-band.Description:To date amplifiers in the optical L-band generate relatively low output power, which reduces their usefulness for high bandwidth data transmission. The activity will develop technologies to enhance t…

This Call for Proposals covers the industry initiated activities for the four Programmes lines identified below:ARTES Core Competitiveness Generic ProgrammeLine- Component B: Competitiveness GrowthARTES Strategic Programme Line Space for 5G/6G and Sustainable Connectivity ARTES Strategic Programme Line Space Systems for Safety and Security (4S)ARTES Strategic Programme Line Optical and Quantum Communication - ScyLight. The participating state…

This Call for Proposals covers the industry initiated activities for the Civil Security for Space programme.

The Pioneer programme, implemented under the ARTES 4.0 Generic Programme Line "Partnership Projects", aims to supports the emergence of Space Mission Providers (SMPs), i.e. commercial entities interested in becoming one-stop-shop service providers for public and private customers. The Open Call for proposals is aimed to offer the opportunity for new companies from across all ESA member states to participate in the programme. It will…

The objective of this activity is to develop a testbed that allows the demonstration of vehicle-to-everything (V2X) 5G services viasatellite. Using existing satellite assets and on-ground antenna for mobile applications (not necessarily aesthetically attractive), the test bed shall address both forward and return link traffic, to support the definition of future V2X applications and associated technical enhancements. The set of services to be…

The objective of this activity is to develop and evaluate efficient digital beamforming algorithms and techniques that are compatible with non-uniform antenna arrays or non-uniform beam lattices. The developed techniques will be implemented and evaluated on a representative processor test bed. Targeted Improvements: 30 to 70% power reduction on the implementation of digital beamforming algorithms with non-uniform input/outputs with respect to…

The objective of this activity is to implement and test the signal processing portion of a 5G LEO satellite payload capable of handling several high throughput beams assuming an active antenna configuration. The demonstrator shall be based on a processor capable of controlling a reconfigurable beam-forming network (BFN) and performing signal (re-)generation andchannelisation of 5G waveforms. Targeted Improvements: Enable 5G regenerative payloa…

Objective: To develop a simulator of optical propagation based on a high-resolution numerical atmospheric simulator, to be used forthe long-term characterisation and the forecast of the signal scintillation and other propagation effects in the area around a ground terminal for Earth-Space optical communication system. Targeted Improvements: Breakthrough to achieve regional optical channel performance assessment; achieve high resolution channel…

The objective of the activity is to design, manufacture and test in orbit an inflatable drag device for de-orbiting small satellites from Low Earth Orbit (LEO). Performance data will be gathered (deployment imagery and positional telemetry) in a fully representative space environment (including drag effects) that would not be possible to simulate or test on ground. Targeted Improvements:Reduce de-orbit time by a factor of 5 (for altitudes of 4…

The objective of this activity is to design, develop and test a breadboard of a highly integrated Q-V band beam forming network forflexible on-board feeder link active antennas. Targeted Improvements: Enabling a European source for Q-V band beamforming for feeder links. Description: Feeder links in next generation Very High Throughput Satellites (VHTS) rely on a full RF chain in Q-V band. Today, mechanically steerable multi-feed antenna archit…