The objective is to carry out an assessment of the NTN deployment of the 5G NR air interface in TDD mode and identification of technology gaps and constraints. Develop a software testbed implementing and testing the scenario.Improve the overall spectrum utilisation by up to 50% when using Time Division Duplex communication as per 3GPP standard.The 3GPP has specified for Non-Terrestrial Networks (NTN) the n255 and n256 bands, both operating in…

The objective of the activity is to develop and test a demonstrator of a frequency coordination system that manages access to spectrum among different non-geostationary satellite systems. The concept will be implemented and tested as a real-time emulator to be developed as part of the activity.Targeted improvements: Improving the achievable throughput by 50% with respect to partitioning the frequency band.Description:The increasing number of c…

The objective of the activity is to develop, manufacture and test an on-off power switching front end for all platform units, consuming less than 1W when set in standby mode and capable to turn on the unit power converter with a command sent over the power bus.Targeted Improvements:- Reduction of 15% of the platform harness mass, of the AIT operations.- Reduction of the unit mass by 10% and of platform dissipation by 30%-50%.- Simplification o…

The objective of the activity is to design, manufacture and test technologies enabling the removal of failed small satellites (e.g.tumbling) from low earth orbit. Several breadboards will be developed and tested to reduce tumbling and to enable rendezvous and capture.Targeted Improvements: Enabling de-orbiting of large constellations of low Earth orbit telecommunication satellites. Description: In the coming years it is expected that the numbe…

The objective of the activity is to develop and test a prototype of the emergency car light device with direct to satellite communication capability in an emulated environment in laboratory.Procurement Policy: C(1) = Activity restricted to non-prime contractors(incl. SMEs). For additional information please go to:…

Objective:The objective of this activity is to develop and test a power efficient 5G User Plane Function (UPF) prototype, implemented onto space enabled hardware platforms. The development will leverage concrete laboratory results of various RAN splits and compensate for their impact on the 5G protocol stack. Finally, system integration with a ground segment control plane will be tested, over emulated LEO constellationsTargeted Improvements:-…

The objective of this activity is to design, manufacture and test two breadboards corresponding to a reconfigurable 4-channel 30 GHz low power Combiner Frequency Multiplexer (CMUX) and a 4-channel 20 GHz low power frequency Demultiplexer (DMUX). Targeted Improvements: Replacement of conventional fixed-bandwidth CMUX and DMUX equipment with a tuneable solution capable of supporting agile traffic management.Description: Current broadband satelli…

This Call for Proposals covers the industry initiated activities for the four Programmes lines identified below:ARTES Core Competitiveness Generic ProgrammeLine- Component B: Competitiveness GrowthARTES Strategic Programme Line Space for 5G/6G and Sustainable Connectivity ARTES Strategic Programme Line Space Systems for Safety and Security (4S) ARTES Strategic Programme Line Optical and Quantum Communication - ScyLight. The participating stat…

The objective of the activity is to develop and test a breadboard of an electrophoretic panel enabling adaptive thermal control on telecommunication spacecraft. Targeted Improvements:-Enabling technology to allow adaptive control of radiative surfaces.-Reduction in heater power of 40% and in radiator size of 30%. Description: Traditional thermal design balances emissivity and absorption parameters based on surface materials and/or coatings sel…

The objective of the activity is to design, develop and validate an on-board software relying on Artificial Intelligence that autonomously detect, isolate and recover failures at spacecraft level and that performs resource optimisation at constellation level to recover and improve the overall availability of the service.Targeted Improvements: - Enabling autonomous FDIR management at the level of constellations.- Enabling autonomous performance…

The objective of the activity is to develop, manufacture and test a cathode for use as a neutraliser in electric propulsion systemsand suitable for operation in an oxygen-rich environment for a long duration of time (e.g. >5 years).Targeted Improvements:Enabling cathode capable of operating in an oxygen-rich environment for more than a few hours.Description: Platforms operating in Very Low Earth Orbit (VLEO) require prolonged and/or continu…

The objective is to develop and test a direct chip to baseplate thermal concept based on Pulsating Heat Pipes that reduces design complexity and yet widens the operating temperature range and thermal transport performance.Targeted Improvements: - Improved heattransfer performance to at least 60 watts per chip.- Operation in adverse vertical gravity and below -40C- Reduced manufacturing complexity in chip to unit baseplate thermal transport com…

The objective of the activity is to investigate, develop and test conformal Printed Circuit Board (PCB) technology using a novel approach, such as additive manufacturing to "print" the antenna for the automotive market. Targeted Improvements: Enabling conformal board of patches with distribution feed and integration of amplifiers on the reverse side, able to follow the shape of a car roof. Description: Conventional PCB technology is…

The objective of the activity is to design, manufacture and test a compact transmit-receive diplexer engineering model with high isolation, low loss and power handling as required for full duplex VHF data exchange payloads.Targeted Improvements: Enabling technology for full duplex VHF data exchange system (VDES) payloads on small satellite platforms.Description: The World Radiocommunication Conference in 2019 allocated maritime VHF frequencies…

The objective of the activity is to develop and test a cyber-physical modelling for a Digital Twin of AOCS sensors. A multi-physic model-based Digital Twin can be used to perform on-board self-calibration employing data-driven techniques and simplify the ground verification of new satellite platforms by having a direct dispersion of the different parameters, hence reducing complex Monte Carlodispersions. Targeted Improvements: Enabling on-boar…

Objective: The objective of the activity is to design, develop and test protocols and system level approaches for energy saving video content distribution in satellite telecommunication networks. A testbed will be developed to evaluate the energy savings achievedin real networks considering the different video codecs, air interfaces and video quality. The output shall be available to the DVBstandardisation EADC (Energy Aware Delivery and Consu…

The objective of this activity is to design, implement and test active queuing management and packet scheduling techniques at the user terminals and ground equipment, so that the SATCOM network continues to provide seamlessly an acceptable throughput and latency to users under any congestion situation.Targeted Improvements:- Enabling a responsive and fair SATCOM network in any traffic andresources availability situation.- Keeping the addition…

Upon Delegation Request (*) The objective of the activity is to develop, manufacture and test an integrated automotive S-band antenna that combines satellite IoT and 5G terrestrial communications. Targeted Improvements: Reduction of antenna form factor from a protruding antenna (e.g. shark fin shape) to planar antenna fully integrated in the car roof. Bandwidth increase from 30 to 90 MHz for satellite and 5G communications. Description: The In…

Objective:This objective of this activity is to develop and test an extended protocol to address the support of predictive Qualityof Service (QoS) in Non-Terrestrial Networks (NTNs). The activity will also undertake the necessary investigation and selection of data-driven algorithms to automate predictive QoS in NTN.Targeted Improvements:Features enhancement to align NTN solutions in an integrated NTN/TN ecosystem in support to automotive serv…

The objective of the activity is to develop, implement and test a breadboard of a digital transceiver front-end capable of switching between access and backhaul modes of operation for integrated satcom-terrestrial 5G/6G networks. The transceiver core shall be supported by an AI/ML engine implemented for a set of commercially available hardware and software platforms. The activity shall also provide the testbed to test the AI/ML-based transceiv…

The objective of this activity is to develop, manufacture and test new solar cells with new structures, new processes that will increase the throughput.Targeted Improvements: Doubling the production throughput by the introduction of innovative processes with anew solar cell designDescription: Currently the demand of highly efficient solar cells is exceeding the supply and requires to bemuch more competitive. Simplified manufacturing processes…

The objective of this activity is to design, develop and test enabling technologies for multi frequency transmit active antenna. This will include antenna radiating elements, beamforming techniques and active elements designed to cover Ku and Ka transmit frequency bands for ground terminals connected to non-geostationary multi-orbit satellites.Targeted Improvements: - Mass and size reduction by 30% by sharing components between frequency bands…

Objective:The objective of the activity is to analyse and demonstrate the benefits of replacing coaxial cables/waveguides with fibre optics in large RF phased array antennas. The activity shall identify the best technologies to be employed and it will design, manufacture and test 2 breadboard demonstrators covering both analogue and digital transmission.Targeted Improvements:Order of magnitude mass and volume reduction by substituting the pass…

The objective of the activity is to investigate and develop spectrum reuse and sharing techniques for integrated NTN-TN 3D networksthat allow them to pool, share, and rapidly reallocate spectrum on demand among their heterogeneous components/segments. The techniques will be prototyped in a testbed to be implemented as part of the activity.Targeted improvements:Enabling spectrum reuse and sharing in integrated NTN-NT 3D networks.Description:Spe…

The objective of the activity is to develop a beamforming concept based on low resolution and low power consumption Components of The Shelf (COTS) Analogue-to-Digital Converters (ADC). The developed concept will be implemented and tested in a combined software and hardware testbed. Targeted improvements: Improved energy efficiency by >50% thanks to the use of low resolution and low power ADC when compared to 10-12 bit resolution ADCs. Descr…