The objective of the activity is to develop and test a computer-assisted approach for in-situ operational health monitoring and anomaly detection for mission-critical platform mechanisms (e.g., reaction wheels, solar array drive mechanisms, antenna pointing mechanisms, laser communication terminals, etc.) in telecommunication spacecraft. Rather than relying on telemetry data, this activity will develop an approach using the full signal and sen…

The objective of the activity is to design a system concept based on distinct transmit-only and receive-only satellites for the user link. The goal is to enable at the system level simultaneous two-way low data rate communication services such as Internet of Things, messaging, and VDES operating in frequency range from VHF to C-band. The system concept will be implemented and tested in an end-to-end system testbed. This includes the user termi…

The objective of this activity is to develop radiation tolerant platform technologies and semi-autonomous orbit transfer capabilityfor small satellite platforms. An experimental small satellite will be designed, manufactured and launched. The satellite will feature the platform technologies developed as well as a simple telecommunication payload allowing experiments during orbit raising to GEO as well as in GSO. Targeted Improvements: Enabling…

The objective of this activity is to develop the technology step needed to enable the use of optical interconnects at speeds of up to 112 Gbps. This should be demonstrated through testing of an integrated digital signal functions (ASIC and FPGAs) with the developed electro-optic transceiver photonic integrated circuits that form the optical I/Os to replace traditional electrical I/O.Targeted Improvements:Increase the data rate throughput up to…

The objective of the activity is to design, manufacture and test an accelerometer for drag compensation in Very Low Earth Orbit (VLEO). Targeted Improvements: - Enabling real time compensation of drag by the propulsion system. - Miniaturisation of instrument by a factor 10 compared to existing payload grade accelerometers. - Increase accuracy by factor 10 compared to existing accelerometers used for orbital control.Description: While intere…

The objective of the activity is to design, manufacture and test an integrated W-band transceiver Radio Frequency Integrated Circuit (RFIC) configurable as transmitter and receiver covering the 71-86 GHz band for aeronautical satcom applications. Targeted Improvements: Enable satellite aeronautical broadband services in W-band. Description: The maturity of Silicon technologies allows for the implementation of multifunctional and reconfigurable…

The objective of the activity is to design, manufacture and test a Ku- or Ka-band transmit or receive antenna based on reconfigurable actuators for large mobile terminals connected to Low Earth Orbit (LEO) satellites.Targeted Improvements:Enabling reconfigurable terminal antennas with scan angles up to 50-60 degrees exploiting active actuators like pin or varactor diodes, MEMS and other possible actuators with an overall antenna thickness belo…

The objective of the activity is to design, manufacture and test a tribology-free mechanism breadboard for both platform and payload pointing applications on telecom satellites. The lifetime of the developed mechanism shall be assessed, and endurance testing shall be carried out. Targeted Improvements: Enabling a European source of compact, tribology-free pointing mechanisms with no backlash or friction hysteresis effects. Description: Today p…

The objective of this activity is to design, develop and test a high-power Tx/Rx W-band diplexer for ground terminals.Targeted Improvements:Enabling technology for ground stations W-band gateway links with high power handling and low PIM.Description:The useof the available spectrum in W-band (71-76 GHz for downlink and 81-86 GHz for uplink) is attractive to satcom systems asit could beadopted in the gateway of Very High Throughput Satellites (…

The objective of this activity is to design, develop and test channel estimation and adaptation techniques as needed for Q/V band feeder links of LEO/MEO constellation with regenerative on-board processors. An end-to-end system testbed will be developed that includes varying channel, antenna and hardware impairments in the downlink and uplink depending on the elevation angle. The testbed will include the baseband, analogue and RF domain to tes…

The objective of this activity is to develop the software protocol stack for Release 18 enhancements related to 5G New for Radio (NR) for Non-Terrestrial Networks. The software protocol stack development shall be based on a testbed considering both the User Equipment (UE) and g-NodeB (gNB) features and operational procedures.Targeted Improvements:Enable 5G NR NTN system performance simulations with the latest Release 18 modifications.Descripti…

Objective: The objective of this activity is to develop, deploy and operate a flexible software-defined radio communication testbedwith a frequency flexible RF front end on the International Space Station, supporting a wide range of frequencies up to Q/V band addressing 5G, signal processing and advanced techniques. Targeted Improvements: Enabling innovative and fast developments of future satcom applications from UHF to Q/V band that are diff…

The objective of the activity is to study and define a technical and deployment roadmap for edge-computing-enabled Beyond 5G (B5G) and 6G space infrastructure. Use cases of Non-Terrestrial Networks (NTN) edge computing will be selected and a corresponding demonstrator will be breadboarded and tested.Targeted Improvements: Enabling edge-computing-capable space infrastructure.Description:The Beyond 5G (B5G)/towards 6G roadmap is rapidly evolving…

The objective of the activity is to design, manufacture and test a set of highly efficient (minimum 25% power added efficiency) Q-band Monolithic Microwave Integrated Circuits (MMIC) for active antenna applications in GEO, MEO and LEO. The packaged devices will be based on European technology covering the 10 Watt power class (GEO) down to a few 100mWs for LEO applications. Targeted Improvements: Enabling critical building block technology deve…

Objectives: The objective of this activity is to design, manufacture and test integrated circuits of the critical beamforming functions in silicon technologies, enabling Q/V-band electronically steerable antenna for satcom terminals. As a minimum, two types of integrated circuits will be developed. One chip shall be a multichannel transmit-receive beamforming radio frequency integrated circuit (RFIC) and the second chip shall be a multichannel…

The objective of this activity to design, manufacture and test a Ku- or Ka-band faceted reconfigurable reflect array operating in receive band for reconfigurable coverage applications. RF and thermo-elastic performance shall be experimentally evaluated.TargetedImprovements: - Reduction up to 20% the reflector aperture diameter in comparison to today's shape reflector technology.- Improvement of the directivity performance at the edge of t…

This Call for Proposals covers the industry initiated activities for the four Programmes lines identified below:ARTES Core Competitiveness Generic ProgrammeLine- Component B: Competitiveness GrowthARTES Strategic Programme Line Space for 5G/6G and Sustainable Connectivity ARTES Strategic Programme Line Space Systems for Safety and Security (4S)ARTES Strategic Programme Line Optical and Quantum Communication - ScyLight. The participating state…

This Call for Proposals covers the industry initiated activities for the Civil Security for Space programme.

The Pioneer programme, implemented under the ARTES 4.0 Generic Programme Line "Partnership Projects", aims to supports the emergence of Space Mission Providers (SMPs), i.e. commercial entities interested in becoming one-stop-shop service providers for public and private customers. The Open Call for proposals is aimed to offer the opportunity for new companies from across all ESA member states to participate in the programme. It will…

The objective of this activity is to develop an integrated structural antenna concept for high aspect ratio satellites. The antenna concept shall be frequency and size scalable. Critical breadboarding shall be carried out to evaluate the concept for mobile satellite communication systems in Low Earth Orbit. Targeted Improvements: Enabling stackable satellites with efficient launch volume occupation with an improvement of 30% in comparison to e…

The objective of this activity is to develop a testbed that allows the demonstration of vehicle-to-everything (V2X) 5G services viasatellite. Using existing satellite assets and on-ground antenna for mobile applications (not necessarily aesthetically attractive), the test bed shall address both forward and return link traffic, to support the definition of future V2X applications and associated technical enhancements. The set of services to be…

The objective of this activity is to develop and evaluate efficient digital beamforming algorithms and techniques that are compatible with non-uniform antenna arrays or non-uniform beam lattices. The developed techniques will be implemented and evaluated on a representative processor test bed. Targeted Improvements: 30 to 70% power reduction on the implementation of digital beamforming algorithms with non-uniform input/outputs with respect to…

The objective of this activity is to implement and test the signal processing portion of a 5G LEO satellite payload capable of handling several high throughput beams assuming an active antenna configuration. The demonstrator shall be based on a processor capable of controlling a reconfigurable beam-forming network (BFN) and performing signal (re-)generation andchannelisation of 5G waveforms. Targeted Improvements: Enable 5G regenerative payloa…

Objective: To develop a simulator of optical propagation based on a high-resolution numerical atmospheric simulator, to be used forthe long-term characterisation and the forecast of the signal scintillation and other propagation effects in the area around a ground terminal for Earth-Space optical communication system. Targeted Improvements: Breakthrough to achieve regional optical channel performance assessment; achieve high resolution channel…

The objective of this activity is to form a European consortium and to develop a solar array test approach as needed for the preparation of the ECSS E-20-08 handbook, in the case of a design or process change. The new test approach will be validated by Development Validation Testing (DVT) coupons. Targeted Improvements: Substantial reduction (50%) in the delta-qualification time of solar panels, which deviate slightly from existing qualified d…