For planet earth and beyond
Funding
This page displays the ARTES Invitation To Tenders (ITTs) which are published on ESA-STAR. If you are looking for a specific element select from the list provided and click on the Apply button to start the search and display the results.
Funding of the individual Prime or subcontractors, for ARTES Core Competitiveness and ARTES Applications activities, is subject to authorisation of the required ARTES budget by the related National Delegations. Therefore, bidding teams are requested to inform their National Delegation(s) of their intention to participate in funded activities already before submitting a proposal.
The official information platform for providing potential bidders all the relevant documentation and details concerning the intended and issued Invitations To Tender (ITTs) for Open Competitions and Direct Negotiations is ESA-STAR - managed and operated by the ESA Procurement Department.
NETWORK EMBEDDED HYBRID CONNECTIVITY OVER TERRESTRIAL AND SATELLITE 5G ACCESS (ARTES 4.0 SPL 5G/6G 3F.012)
Objective: The objective of this activity is to design, develop and test a 5G system to support upper layer Access Traffic Switching, Steering and Splitting (ATSSS) mechanisms relating a User Equipment (UE) data session across dual terrestrial and satellite 5G access, as well as over dual 5G satellite access.Targeted Improvements:- Enable dual 3GPP access- Significant part reduction - Network and device centric system- Enable 5G Core Network w…
OPTIMISED VIRTUAL PRIVATE NETWORKS FOR CONSTELLATIONS (LEO, MEO, OR MULTI-ORBIT) AND GEO SPACE NETWORKS ( ARTES 4.0 SPL 4S 3D.031)
The objectives of this activity are to design, develop and test techniques enabling integration of existing and new VPN solutions suitable for space networks (LEO constellation, MEO constellation or GEO) for the purpose of comparison, performance evaluation and optimisation, while maintaining compatibility with terrestrial networks.
ARTES 4.0 SPL OPTICAL COMMUNICATION - SCYLIGHT: RF AND OPTICAL HYBRID GATEWAY ANTENNA (6C.002/SL.024)(ON DELEGATION REQUEST) - EXPRO PLUS
Objective:The objective of this activity is to investigate a telecom gateway antenna able to work simultaneously in both the RF (Ka- Q/V-Band) and optical wavelengths.Targeted Improvements:This product is currently not available and it would allow a phased migration from RF communications to optical communications.Description:There is a clear trend in the need to increase bandwidth in order to increase the data rate, within the telecommunicat…
HIGH BANDWIDTH INTERFACE RADIATION MITIGATION IP CORE FOR PROGRAMMABLE LOGIC DEVICES (ARTES 4.0 AT 5C.489)
The objective of the activity is to develop, implement and test a 100 Gbps class interface radiation mitigation IP core for programmable logic devices for application in Low Earth and Geostationary Orbits. This includes hardware radiation characterisation and testing. Targeted Improvements: 3 to 4 times improvement of high-speed serial link data rate (from 32 Gbps to 112 Gbps) under radiation conditions. Description: State of the art programma…
KA-BAND RADIO FREQUENCY FRONT-END RESISTANT TO INTENTIONAL INTERFERENCE FOR SECURE TTC (ARTES 4.0 4S SPL 4G.041)
The objective of the activity is to design, manufacture and test a Scaled Engineering Model of rugged Ka-band RF front-end for secure TTC applications that will enable technologies for mitigation of intentional interference. Targeted Improvements: Ability to operate under severe Radio Frequency Interference. Description: TTC is a key equipment for all satellites since it provides the umbilical cord to the control station(s). It has to operate…
PROTOCOL STACK ENABLING VOICE-CALL USING NON-TERRESTRIAL IOT WAVEFORM (ARTES 4.0 SPL 5G/6G 3F.013)
The objective of this activity is to develop the software protocol stack for Release 18 enhancements related to 5G New for Radio (NR) for Non-Terrestrial Networks. The software protocol stack development shall be based on a testbed considering both the User Equipment (UE) and g-NodeB (gNB) features and operational procedures.Targeted Improvements:Enable 5G NR NTN system performance simulations with the latest Release 18 modifications.Descripti…
5G AUTOMOTIVE MAKERSPACE (ARTES 4.0 SPL 5G/6G 3F.010)
Objective: The objective of this activity is to design, develop and test automotive prototypes following 5GAA workplans and increase the number of companies working on automotive satellite communications by 30%. Targeted Improvements: Novel hand-over methods between satellite and terrestrial networks supporting use cases as formulated by 5GAA and miniaturised automotive terminal baseband units.Description: The 5G Automotive Association (5GAA)…
SOFTWARE DEFINED NETWORKING-BASED SOLUTIONS FOR EFFICIENT DISTRIBUTED DENIAL OF SERVICES PROTECTION OF 5G NON TERRESTRIAL NETWORKS (ARTES 4.0 SPL 4S 3D.027)
The objective of this activity is to identify+ develop and test Software Defined Networking (SDN) based solutions for 5G Core Network (CN)+ capable of addressing efficiently and effectively Distributed Denial of Services (DDoS) attacks against 5G Non-Terrestrial Networks. This activity will develop a testbed of SDN implementation for 5G CN to test protection mechanisms against various attack scenarios for relevant 5G NTN use cases+ and study t…
ARTES 4.0 SPL OPTICAL COMMUNICATION - SCYLIGHT : DEMONSTRATION OF RELIABLE HIGH DATA RATE OPTICAL LINKS UNDER STRONG ATMOSPHERIC TURBULENCE CONDITIONS (3B.042 / SL.015)
Objective:The objective of this activity is to demonstrate reliable high data rate optical transmission through the atmosphere (>100Gbps) in a scenario representative (in terms of link attenuation and optical turbulence) of an optical link between a telecom satellite and an Optical Ground Station for elevation angles down to 5deg. Targeted Improvements:Improve the service quality and availability of high data rate optical links through the…
DEVELOPMENT OF A TESTBED TO ASSESS SPACECRAFT MATERIALS ROBUSTNESS AGAINST ATOMIC OXYGEN IN VERY LOW EARTH ORBIT ENVIRONMENT (ARTES AT 4A.101)
The Objective: The objective of the activity is to design, manufacture a testbed to determine materials behaviour of atomic oxygen fluence exposure representative in Very Low Earth Orbit (VLEO) environment. With the help of the testbed, in a second step, an aerodynamic and oxygen fluence resistant coating will be developed and evaluated as needed for protection of exposed parts of the spacecraft to the VLEO environment.Targeted Improvements: E…
MASS MEMORY UNIT WITH 100 GIGABIT PER SECOND WRITE RATE CLASS FOR LOW EARTH ORBIT COMMUNICATION APPLICATIONS (ARTES AT 5C.498) (ON DELEGATION REQUEST)
The objective of this activity is to design, manufacture and test a memory unit breadboard offering interface port and memory read and write speeds at 100 GigaBit per second and a capacity of at least 3 TeraBits for interconnected constellation telecommunication systems. Targeted Improvements: Improvement of the write speed by a factor of 10 compared to FLASH-based mass memories. Description:Future Low Earth Orbit (LEO) constellations with hig…
HANDOVER ENGINE AND TESTBED FOR SATELLITE-BASED 5G NON-TERRESTRIAL NETWORKS (NTNS) (ARTES 4.0 SPL 5G/6G 3F.015)
The objective of this activity is to develop a machine learning (ML) engine that optimises handover between two different 5G networks, where at least one of them is a satellite-based non-terrestrial network (NTN). The activity will also provide the testbed to assess the handover key performance indicators in a laboratory environment.Targeted Improvements:Identify and avoid higher risk handovers improving thus the handover success rate to reach…
ATMOSPHERIC TURBULENCE EFFECT MITIGATION BY SECONDARY MIRROR ACTUATION (ARTES 4.0 SL SPL 6C.020)
Objective: The objective of this activity is to simplify optical feeder links systems in Optical Ground Stations by replacing the secondary mirror with an active (deformable) one and to demonstrate the improvement in transmission budget and complexity. Targeted Improvements: 30% increased optical throughput in optical communication ground stations. 20% reduction of complexity in adaptive optics and beam pre-distortion in feeder-link systems. R…
WEATHER-PROOF OPTICAL COMMUNICATION GROUND TERMINAL (ARTES 4.0 SL SPL 6C.050 ) EXPRO PLUS
The objective of this activity is to evaluate the pros and cons of a weather-proof optical ground terminal (without protective domeenclosure) and to breadboard critical sub-systems. Targeted Improvements:At least 50% faster optical ground station deployment.Description:Today telescopes for ground based free-space optical satellite communication are originating from astronomical telescopes. The current need for optical ground telescopes has cha…
ZERO-TRUST ARCHITECTURE FOR LOW EARTH ORBIT REGENERATIVE PAYLOADS ( ARTES 4.0 SPL 4S 3D.029)
The objective of this activity is to design+ implement+ and validate a zero-trust architecture for a Low Earth Orbit regenerative 5G gNodeB+ that mitigates the security risks specific to 5G Non-Terrestrial Networks.
ARTES 4.0 SPL 4S 5A.087 REGENERATIVE TRANSPONDER WITH BUILT-IN SIGNAL SECURITY PROCESSING FOR USER AUTHORISATION
The objective of the activity is to develop technology to prevent non authorised usage of satellite communication bandwidth throughthe implementation and enforcement of on-board authentication protocols. During this activity+ a breadboard that implements such protocol will be developed in a laboratory environment.
DRAG AND ATOMIC OXYGEN RESISTANT CARBON FIBRE REINFORCED POLYMER FOR VERY LOW EARTH ORBIT TELECOM SATELLITES (ARTES AT 4A.092) (ON DELEGATION REQUEST)
The objective of the activity is to develop and test a coating material (e.g. for substrates such as carbon fibre reinforced polymer, polymers, etc) with improved atomic oxygen and drag resistance to be used on the external satellite surfaces for very low Earth orbit applicationsTargeted Improvements:- Enabling technology not existing today; allowing telecommunication satellites with conventional construction materials in much lower orbits tha…
POWER EFFICIENT ONBOARD ANALOGUE PHOTONIC INTERCONNECTS FOR HIGH THROUGHPUT SATELLITES (HTS) (ARTES 4.0 SL SPL 5F.050)
The objective of the activity is to develop very low power analogue photonic interconnects for linking antennas to the on-board digital processor in high throughput satellites, also in view of an all-optical satellite implementationTargeted Improvements:Increase connector density by 100% through the replacement of the coaxial cable connectors with multi-fibre connectors, more than halvingthe harness mass and volume linking the antennas to the…
ARTES 4.0 SPL 4S 3A.199 RADIO RESOURCE MANAGEMENT TECHNIQUES FOR JAMMING MITIGATION IN NGSO CONSTELLATIONS
The objective of the activity is to design, develop and test jamming mitigation strategies for NGSO broadband secure systems based on adaptive radio resource management algorithms.
DEVELOPMENT OF A SOFTWARE BASED GENERIC OPTICAL GROUND STATION MODEL (ARTES 4.0 SL SPL 6B.126)
The objective of this activity is to develop and test a software platform acting as an abstraction layer between the optical groundstation software client and the various software and hardware modules and their interfaces. Software implementation to be agnostic to operating systems and shall be based on object-oriented techniques to enable creation of a generic optical ground station model prior to programming. Testing shall and use commercial…
SOLAR ARRAY WITH LATCHED SHALLOW CURVED SURFACE FOR IMPROVED DEPLOYED STIFFNESS (ARTES AT 4F.161) (ON DELEGATION REQUEST)
The objective of the activity is to develop, manufacture and test a latch to enhance the deployed stiffness of an existing array, by means of a slight repositioning of panels. Targeted Improvements: Increase the frequencies of the deployed array by 30%.Description: Most telecommunication solar arrays comprise in-line panels, arranged in a row. Some include lateral panels, forming a cross configuration. In the case of the latter, the frequency…
COMPACT, HIGH TEMPERATURE AND MODULAR 100 W-CLASS ELECTRONIC POWER CONDITIONER FOR KU- AND KA-BAND TRAVELLING WAVE TUBES (ARTES AT 5C.514)
The objective of this activity is to develop and test a modular 100W-class Ku- and Ka-band universal compact Electronic Power Conditioner (EPC) based on MHz-range switching frequency, high temperature, wide bandgap technology and planar magnetics. This will include an efficient thermal management design.Targeted Improvements: - Mass, footprint and volume reduction up to 30% whilst maintaining efficiency comparable to current state of art.- Com…
L-BAND GALLIUM NITRIDE LOW NOISE AMPLIFIER-BASED RF FRONT-END (ARTES AT 5C.465) (ON DELEGATION REQUEST)
The objective of the activity is to design a compact L-band RF front-end for telecom applications which is based on a GaN Low NoiseAmplifier (LNA). A breadboard of a GaN microwave monolithic integrated circuit will be developed and tested. The RF front-end including the filtering function shall be modelled.Targeted Improvements: up to 30% mass and volume saving of the RF front-end (LNA and filtering) and 20 dB improvement of the LNA dynamic ra…
KA-BAND TRANSMIT SPARSE ACTIVE PHASED ARRAY AND BEAMFORMING NETWORKS FOR NGSO USER LINKS (ARTES AT 5B.240)
The objective of this activity is to design, manufacture and test a partial RF breadboard of a transmit Ka-band, active phased array antenna and associated beamforming network for user links NGSO, exploiting irregular layouts for the radiating elements and beamforming networks.Targeted Improvements: In comparison to a standard, fully populated array:- 25% reduction in the number of active controls,- 5% increase in the DC to RF power efficiency…
EUROPEAN CHIP INDUCTOR FOR POINT OF LOAD CONVERTERS IN TELECOMMUNICATION SATELLITES (ARTES 4.0 AT 5C.499)
The objective of the activity is to design, manufacture and test surface mount chip inductors enabling low voltage (down to 0.8 V range) stability, fast transient response, high-speed switching capability and efficient power conversion of point of load(POL) converters, as needed for next generation digital integrated circuits in telecommunication satellites.Targeted Improvements:- Enablinga European source.- 20% mass and volume reduction and 2…