The objective of this activity is to design and perform an in-orbit experiment investigating autonomous deployment and early operations for telecom constellation satellites. This includes the development of command and data-handling hardware as well as AI/ML based operational algorithms developed on-ground.Targeted Improvements: Increase of onboard autonomy by 50% (i.e. include the key number of autonomous functions), including attitude acquis…

The objective of the activity is to design, manufacture and test an electric thruster using Argon propellant, compatible with the long lifetime and high total impulse requirements of telecommunication satellites in GEO and for constellations.Targeted Improvements:- Novel capability to operate with Argon propellant not existing today.- Improved lifetime and Total Impulse per kW(N.s/kW) by a factor of 2.- Decreased complexity of the thruster arc…

Objective: The objective of the activity is to develop and test NGSO networking techniques for 5G V2X services. The developments will be implemented and verified in a simulator modelling realistic system scenarios of 5G LEO satellites. Targeted Improvements: Enabling the provision of 5G V2X services by satellite. Description:Due to their low altitudes, LEO satellite systems may offer low-latency 5G connectivity that, paired with on-board edge…

1. Introduction.Four new technology and product development activities are added in 2021, that have already been identified as useful to the foreseen development of next-generation 4S solutions over the coming years. These work plan activities will be issued under the legal framework of the ARTES 4.0 Strategic Programme Line (SPL) Space Systems for Safety and Security (4S).2. ImplementationPhasing: phasing of the contractual activities may be…

The objective of the activity is to develop and test a prototype of the emergency car light device with direct to satellite communication capability in an emulated environment in laboratory.Procurement Policy: C(1) = Activity restricted to non-prime contractors(incl. SMEs). For additional information please go to:…

The objective of this activity is to design, manufacture and test a breadboard of a high-power amplifier in Ku-band or above with 10 W/mm class of power density in continuous wave operation. The selected manufacturing process will allow a smaller chip size with reduced junction temperature, reduced thermal memory effects and improved efficiency.Targeted Improvements:- 3-5 times improvementin power density.- Junction temperature reduction of te…

The objective of the activity is to develop and test a computer-assisted approach for in-situ operational health monitoring and anomaly detection for mission-critical platform mechanisms (e.g., reaction wheels, solar array drive mechanisms, antenna pointing mechanisms, laser communication terminals, etc.) in telecommunication spacecraft. Rather than relying on telemetry data, this activity will develop an approach using the full signal and sen…

The objective of the activity is to identify and benchmark power efficient radio frequency algorithms on complex System on Chip (SoC) devices. Power efficient algorithms for at least two applications case (e.g. beamforming, decoding/encoding, neural networks...) will be designed, developed and tested and compared to programmable logic only implementation.Targeted Improvements: 50% reductionpower consumption for radio frequency algorithms with…

The objective of the activity is to test the performance of beyond line-of-sight narrow-band communication links between ground andLEO satellites in operational conditions. One of the key aspects of the experiment is the effect of ionospheric refraction and reflection as an enabler of satellite links beyond the line of sight. The activity will include the development of a small payload and aground terminal. Targeted Improvements:Enabling new s…

The objective is to develop an onboard data handling architecture capable of autonomously acquiring, processing and interpreting housekeeping and telemetry data and taking the required actions without ground intervention. The activity will develop a data handlingsub-system demonstrator to validate the intelligent functionalities, including prognostic and health management (PHM) capabilitiesTargeted Improvements: Enabling technology development…

The objective of the activity is to develop and test a breadboard of an electrophoretic panel enabling adaptive thermal control on telecommunication spacecraft. Targeted Improvements:-Enabling technology to allow adaptive control of radiative surfaces.-Reduction in heater power of 40% and in radiator size of 30%. Description: Traditional thermal design balances emissivity and absorption parameters based on surface materials and/or coatings sel…

Objective: The objective of the activity is to first design a Laser Communication Terminal (LCT) concept suitable for communicationover lunar distances. In a second step, the activity will develop an engineering model of a CCSDS compatible transceiver with critical functions including coding, synchronisation, and modulation. Targeted Improvements: Enabling a European or Canadian lunar communication terminal operating with a data rate one order…

The objective of this activity is to develop, design, manufacture and test a battery with European Commercial Off The Shelf (COTS) battery cells for telecom space applications. Targeted Improvements:- At least 20% mass reduction at battery level;- Enabling European independency and continuity of technology sourcing. Description: Current state-of-the-art space Li-Ion cell technology can provide around 180 Wh/kg, while Li-Ion COTS cell technolog…

The objective of the activity is to develop and test a digital-twin for on-orbit assembly and manufacturing of antennas up to 30-50metres diameter. An end-to-end manufacturing process will be selected and guidance, navigation and control techniques for assembly and manufacturing on-orbit will be developed. A simple large reflector antenna will be designed, and assembly and manufacturing will be evaluated with the developed digital twin.Targete…

The objective of this activity is to design, develop and test a high-power Tx/Rx W-band diplexer for ground terminals.Targeted Improvements:Enabling technology for ground stations W-band gateway links with high power handling and low PIM.Description:The useof the available spectrum in W-band (71-76 GHz for downlink and 81-86 GHz for uplink) is attractive to satcom systems asit could beadopted in the gateway of Very High Throughput Satellites (…

The objective of the activity is to design, manufacture and test an accelerometer for drag compensation in Very Low Earth Orbit (VLEO). Targeted Improvements: - Enabling real time compensation of drag by the propulsion system. - Miniaturisation of instrument by a factor 10 compared to existing payload grade accelerometers. - Increase accuracy by factor 10 compared to existing accelerometers used for orbital control.Description: While intere…

Objective: The objective of the activity is to design, develop and test protocols and system level approaches for energy saving video content distribution in satellite telecommunication networks. A testbed will be developed to evaluate the energy savings achievedin real networks considering the different video codecs, air interfaces and video quality. The output shall be available to the DVBstandardisation EADC (Energy Aware Delivery and Consu…

Upon Delegation Request (*) The objective of the activity is to develop and validate a mobile terminal antenna that supports satellite connectivity and terrestrial 5G. A prototype of the antenna will be manufactured and tested in a laboratory environment. Targeted Improvements: Terminal size, weight and power reduction (30 to 50%) achieved by integrating 5G satellite and terrestrial antenna systems.The integration of satellite communications…

The objective of the activity is to design a system concept based on distinct transmit-only and receive-only satellites for the user link. The goal is to enable at the system level simultaneous two-way low data rate communication services such as Internet of Things, messaging, and VDES operating in frequency range from VHF to C-band. The system concept will be implemented and tested in an end-to-end system testbed. This includes the user termi…

The objective of the activity is to investigate, develop and test conformal Printed Circuit Board (PCB) technology using a novel approach, such as additive manufacturing to "print" the antenna for the automotive market. Targeted Improvements: Enabling conformal board of patches with distribution feed and integration of amplifiers on the reverse side, able to follow the shape of a car roof. Description: Conventional PCB technology is…

The objective of the activity is to design, manufacture and test a tribology-free mechanism breadboard for both platform and payload pointing applications on telecom satellites. The lifetime of the developed mechanism shall be assessed, and endurance testing shall be carried out. Targeted Improvements: Enabling a European source of compact, tribology-free pointing mechanisms with no backlash or friction hysteresis effects. Description: Today p…

Objective: The objective of the activity is to develop low noise and small footprint semiconductor laser diodes at 1064nm compatible with WDM operation and the associated low-power consumption driving electronics. The activity shall also investigate technologicaloptions to further reduce the footprint and the power consumption of the low-power section of an optical transmitter at 1064nm (e.g., integration of multiple lasers diodes, optical mod…

The objective of the activity is to study and define a technical and deployment roadmap for edge-computing-enabled Beyond 5G (B5G) and 6G space infrastructure. Use cases of Non-Terrestrial Networks (NTN) edge computing will be selected and a corresponding demonstrator will be breadboarded and tested.Targeted Improvements: Enabling edge-computing-capable space infrastructure.Description:The Beyond 5G (B5G)/towards 6G roadmap is rapidly evolving…

The objective of the activity is to design, manufacture and test a set of highly efficient (minimum 25% power added efficiency) Q-band Monolithic Microwave Integrated Circuits (MMIC) for active antenna applications in GEO, MEO and LEO. The packaged devices will be based on European technology covering the 10 Watt power class (GEO) down to a few 100mWs for LEO applications. Targeted Improvements: Enabling critical building block technology deve…

Objective: The objective is to develop, manufacture and test a breadboard of a lightweight, rollable, passive reflect-array or transmit-array deployed antenna. This shall operate at L- or Sband and have an aperture area of at least 5 square metre.Targeted Improvements: Enabling technology for large aperture deployable antennas based on a simple, reliable and robust mechanical deployment scheme, not existing today in ESA member states.Descripti…