1. Introduction.Four new technology and product development activities are added in 2021, that have already been identified as useful to the foreseen development of next-generation 4S solutions over the coming years. These work plan activities will be issued under the legal framework of the ARTES 4.0 Strategic Programme Line (SPL) Space Systems for Safety and Security (4S).2. ImplementationPhasing: phasing of the contractual activities may be…

The objective of the activity is to develop and test a configurable execution environment for an intelligent platform data handlingsystemTargeted Improvements:- 30% improvement of the performance of autonomous applications.- 50% reduction of the applicationsoftware integration and validation efforts.Description: The increase of processing power onboard spacecrafts will allow the implementation of intelligent functionalities such as early fail…

Objective: The objective is to design, implement and test the IP Cores of the receiver for the coding and synchronisation layer of the two CCSDS telemetry waveforms for optical communications. Targeted Improvements: New market opportunities for optical terminal and equipment manufacturers, addressing both photon-starved links up to 8Gbps and high data rate links up to 10Gbps. This activity will target to reduce by 50% the development costs in…

Objective: The objective of the activity is to develop and test NGSO networking techniques for 5G V2X services. The developments will be implemented and verified in a simulator modelling realistic system scenarios of 5G LEO satellites. Targeted Improvements: Enabling the provision of 5G V2X services by satellite. Description:Due to their low altitudes, LEO satellite systems may offer low-latency 5G connectivity that, paired with on-board edge…

The objective of this activity is to design, manufacture and test a 100W W-band waveguide high power isolator engineering model forfeeder link applications.Targeted Improvements: Enabling technology development for W-band feeder links not existing today in ESAMember States.Description: The usage of the spectrum available in W-band for satellite communications offers the opportunity to reduce the number of gateways in the ground segment. For su…

The objective of the activity is to test the performance of beyond line-of-sight narrow-band communication links between ground andLEO satellites in operational conditions. One of the key aspects of the experiment is the effect of ionospheric refraction and reflection as an enabler of satellite links beyond the line of sight. The activity will include the development of a small payload and aground terminal. Targeted Improvements:Enabling new s…

Objective: Power efficient 75W class solid state power amplifier module for active antenna applicationsTargeted Improvements: - Reduced mass and volume by more than 50% compared to travel wave tube amplifiers.- Increased power efficiency by 20% in comparison to current state of art, reaching at least 40% PAE at the nominal operation point in Ku-band or 35% in Ka-bandDescription: Satellite telecommunication systems have experienced an evolution…

The objective of this activity is to design, develop, test in a lab environment and over representative conditions a multi-constellation broadband UAV terminal prototype, i.e. a fixed-wing UAV terminal prototype including modem and RF front-end, that transmits via multiple beams towards multiple satellite orbits (GSO or NGSO) high data rate payload data to both commercial and governmental frequency bands.

The objective of the activity is to develop and test a computer-assisted approach for in-situ operational health monitoring and anomaly detection for mission-critical platform mechanisms (e.g., reaction wheels, solar array drive mechanisms, antenna pointing mechanisms, laser communication terminals, etc.) in telecommunication spacecraft. Rather than relying on telemetry data, this activity will develop an approach using the full signal and sen…

The objective is to develop, embark and carry out an in-orbit experiment to investigate the performance of specific air interfaces over very low frequencies (in the 24 to 72 MHz range) for very low data rate (Internet of Things (IoT), emergency paging etc) from satellite to ground and vice versa. This experiment will include the channel characterisation (including space weather effects) and communication performance assessment in outdoor and i…

The objective of this activity is to develop, design, manufacture and test a battery with European Commercial Off The Shelf (COTS) battery cells for telecom space applications. Targeted Improvements:- At least 20% mass reduction at battery level;- Enabling European independency and continuity of technology sourcing. Description: Current state-of-the-art space Li-Ion cell technology can provide around 180 Wh/kg, while Li-Ion COTS cell technolog…

The objective of the activity is to develop, manufacture and test a power module with a new concept for Li-Ion battery management and with an advanced Electrical Power System Telemetry able to collect, store, retrieve and process large quantity of data related tothe Status of the Power System (SA, Battery, PCDU). A digital oscilloscope for the Built-In Test function and a function to analysein flight the degradation of solar arrays will be imp…

Objective: The objective is to develop and test a Ku or Ka band transparent phased array antenna to provide broadband connectivity on board cars. Targeted Improvements: Develop a new class of phased array antennas for cars able to guarantee a seamless broadband connectivity with LEO satellites. Description: There is today a significant interest to provide broadband connectivity to cars. This request is associated to the need to guarantee emerg…

Upon Delegation Request (*) The objective of the activity is to develop and validate a mobile terminal antenna that supports satellite connectivity and terrestrial 5G. A prototype of the antenna will be manufactured and tested in a laboratory environment. Targeted Improvements: Terminal size, weight and power reduction (30 to 50%) achieved by integrating 5G satellite and terrestrial antenna systems.The integration of satellite communications…

The objective of the activity is to produce a software development environment able to configure and build the full avionics software of a satcom using a model-based approachTargeted Improvements:- Reduction of up to 50% of the development time of the avionics system functions,- Enable one avionic platform to support many missions while being fully reconfigurable in flight.Description:The availability of System-on-Chip, powerful micro-control…

ESA will support an initiative to define a future amateur satellite payload in geostationary orbit. ESA proposes that this activitywill be implemented by a combination of collaborative internal, industrial, and amateur efforts, all within the financial envelope as indicated. The activity shall consolidate requirements from the amateur and commercial satellite industry, trade-off several payload options, address the future user segment, develop…

The objective of this activity is to design, develop and test a high-power Tx/Rx W-band diplexer for ground terminals.Targeted Improvements:Enabling technology for ground stations W-band gateway links with high power handling and low PIM.Description:The useof the available spectrum in W-band (71-76 GHz for downlink and 81-86 GHz for uplink) is attractive to satcom systems asit could beadopted in the gateway of Very High Throughput Satellites (…

The objective of the activity is to design, manufacture and test an engineering model of a standalone subsystem that will collect telemetry and command logs. In the event of mission failure the device will communicate this to the mission operations team to improve the speed and depth of understanding behind the root-cause of the mission failure. Targeted Improvements: Enabling higher operational reliability of nano- and microsatellites by impr…

The objective of the activity is to develop technology to prevent non authorised usage of satellite communication bandwidth throughthe implementation and enforcement of on-board authentication protocols. During this activity+ a breadboard that implements such protocol will be developed in a laboratory environment.

Objective: The objective of the activity is to develop low noise and small footprint semiconductor laser diodes at 1064nm compatible with WDM operation and the associated low-power consumption driving electronics. The activity shall also investigate technologicaloptions to further reduce the footprint and the power consumption of the low-power section of an optical transmitter at 1064nm (e.g., integration of multiple lasers diodes, optical mod…

The objective of the activity is to develop a digital model of a high voltage module typically used in power processing units for electric propulsion or travelling wave tube amplifiers. This model or "digital twin" shall enable an in-depth evaluation which is today only possible by test.Targeted Improvements: Enabling a new approach to achieve innovation acceleration of high voltage module design and test, leading to:- decrease of th…

The objective of the activity is to study and define a technical and deployment roadmap for edge-computing-enabled Beyond 5G (B5G) and 6G space infrastructure. Use cases of Non-Terrestrial Networks (NTN) edge computing will be selected and a corresponding demonstrator will be breadboarded and tested.Targeted Improvements: Enabling edge-computing-capable space infrastructure.Description:The Beyond 5G (B5G)/towards 6G roadmap is rapidly evolving…

The objective of this activity is to design, develop and test enabling technologies for multi-frequency transmit active antennas. This will include antenna radiating elements, beamforming techniques (analogue vs hybrid), active elements customised in order to cover both the Ku and Ka transmit frequency bands, integrated into a breadboard. Targeted Improvements: Enabling dual Ku and Ka-band transmit active phased arrays. Description: Active ant…

The objective of the activity is to test electrical insulation methods to replace reliable electrical insulation by reliable simpleelectrical insulation and to provide inputs to guidelines to ECSS-E-ST-20C Rev2.Targeted Improvements:Mass, volume, manufacturing time reduced by a factor of 2 compared to current reliable insulation technologies.Description: Double insulation rules lead tooversize electrical architectures to make them robust to s…

The objective of the activity is to develop and test a reprogrammable testbed in space to permit the experimentation of Beyond 5G (B5G) satellite features and capabilities and enable technology verification and demonstration; rapid validation of end-to-end solutions and services, following the principles of continuous development/continuous integration. B5G satellitefeatures will be implemented in the testbed as part of the activity to demonst…