For planet earth and beyond
Funding
This page displays the ARTES Invitation To Tenders (ITTs) which are published on ESA-STAR. If you are looking for a specific element select from the list provided and click on the Apply button to start the search and display the results.
Funding of the individual Prime or subcontractors, for ARTES Core Competitiveness and ARTES Applications activities, is subject to authorisation of the required ARTES budget by the related National Delegations. Therefore, bidding teams are requested to inform their National Delegation(s) of their intention to participate in funded activities already before submitting a proposal.
The official information platform for providing potential bidders all the relevant documentation and details concerning the intended and issued Invitations To Tender (ITTs) for Open Competitions and Direct Negotiations is ESA-STAR - managed and operated by the ESA Procurement Department.
MULTIFUNCTIONAL HINGE FOR LARGE ON-BOARD DIRECT SATELLITE-TO-DEVICE ACTIVE ANTENNA ARRAYS (ARTES 4.0 SPL 5G/6G 4E.093)
The objective of the activity is to develop and test a multifunctional hinge technology to accommodate a large multi panel active antenna array on a spacecraft platform, with integrated sensing to avoid adverse local deflections due to spacecraft dynamics.Targeted Improvements:Enabling technology for very large active antennas with disperse panels to be accommodated on a spacecraft platformfor future 5G/6G (direct to handheld) satellitesDescri…
VERY LOW EARTH ORBIT SYSTEM SIMULATOR FOR DIRECT SATELLITE-TO-DEVICE 5G/6G COMMUNICATIONS (ARTES 4.0 SPL 5G/6G 3F.019)
Objective: The objective of the activity is to develop and test a system simulator testbed capable of modelling and assessing the performance of communication satellite constellations operating in Very Low Earth Orbit (VLEO). This includes the assessment of the emerging waveforms (5G NTN, European Protected Waveform).Targeted Improvements: Enable the design and assess the constellation system performance of communication satellites operating i…
SPIN-IN OF SLIPRING TECHNOLOGY FOR SATCOM APPLICATIONS (ARTES AT 4E.096)
The objective of the activity is to select an off the shelf European slipring technology for terrestrial applications and demonstrate its suitability for Satcom applicationTargeted Improvements: Improving by 20% of power density, lifetime, mass, volume, and lead time.Description: Solar Array Drive Mechanism (SADM) require complex slip-ring technology often leading to long delivery times. However, slipring technologies for terrestrial applicati…
MASS MEMORY UNIT WITH 100 GIGABIT PER SECOND WRITE RATE CLASS FOR LOW EARTH ORBIT COMMUNICATION APPLICATIONS (ARTES AT 5C.498) (ON DELEGATION REQUEST)
The objective of this activity is to design, manufacture and test a memory unit breadboard offering interface port and memory read and write speeds at 100 GigaBit per second and a capacity of at least 3 TeraBits for interconnected constellation telecommunication systems. Targeted Improvements: Improvement of the write speed by a factor of 10 compared to FLASH-based mass memories. Description:Future Low Earth Orbit (LEO) constellations with hig…
ON-CHIP ACTIVE RECONFIGURABLE FILTERS FOR 5G PHASED ARRAY ANTENNAS (ARTES 4.0 SPL 5G/6G 7A.076)
The objective is to develop and test a Ku or Ka band transparent phased array antenna to provide broadband connectivity on board cars. Targeted Improvements: Develop a new class of phased array antennas for cars able to guarantee a seamless broadband connectivitywith LEO satellites. Description: There is today a significant interest to provide broadband connectivity to cars. This request is associated to the need to guarantee emergency service…
ATMOSPHERIC TURBULENCE EFFECT MITIGATION BY SECONDARY MIRROR ACTUATION (ARTES 4.0 SL SPL 6C.020)
Objective: The objective of this activity is to simplify optical feeder links systems in Optical Ground Stations by replacing the secondary mirror with an active (deformable) one and to demonstrate the improvement in transmission budget and complexity. Targeted Improvements: 30% increased optical throughput in optical communication ground stations. 20% reduction of complexity in adaptive optics and beam pre-distortion in feeder-link systems. R…
IMPLEMENTATION OF SOFTWARE MITIGATION SOLUTIONS FOR RADIATION-INDUCED SINGLE EVENT EFFECTS (ARTES 4.0 AT 5C.490) - RE-ISSUE OF ITT 1-11734
The objective of the activity is to de-risk software mitigation techniques for radiation effects on a family of high-performance processors embedded in System on Chip (SoC) components. The activity will identify, on one or more processors of interest for the industry, radiation-induced failure modes and will implement appropriate software mitigation techniques with reuse or development of small FPGA IPs if needed. Targeted Improvements: Enable…
SECURE SATCOM MODULE IN SUPPORT OF GLOBAL NAVIGATION SATELLITE SYSTEM SERVICE DELIVERY AND ROBUSTNESS (ARTES 4.0 SPL 4S 3A.196) (ON DELEGATION REQUEST)
The objective of the activity is to design+ develop and manufacture a ground-based breadboard module allowing existing and auxiliary data from/linked to GNSS services to be securely delivered to their users via satellite communications using a secure protocol.
DEMISABILITY OF OPTICAL COMMUNICATION TERMINALS FOR SATCOM CONSTELLATIONS IN LEO (ARTES 4.0 SL SPL 5A.081)
Objective:The key objective of this activity will be the investigation of the demise behaviour of different optical communicationterminals for current and future applications on-board satcom platforms in LEO (e.g. future constellations) and therefore the development of breadboard of the design for demise solutions and technologies identified to reduce the on-ground casualty risks associated with these elements.Targeted Improvements:Reduce by a…
SOLAR ARRAY WITH LATCHED SHALLOW CURVED SURFACE FOR IMPROVED DEPLOYED STIFFNESS (ARTES AT 4F.161) (ON DELEGATION REQUEST)
The objective of the activity is to develop, manufacture and test a latch to enhance the deployed stiffness of an existing array, by means of a slight repositioning of panels. Targeted Improvements: Increase the frequencies of the deployed array by 30%.Description: Most telecommunication solar arrays comprise in-line panels, arranged in a row. Some include lateral panels, forming a cross configuration. In the case of the latter, the frequency…
ELECTROMECHANICAL MULTILINE THRUSTER SWITCHING UNIT FOR ELECTRIC PROPULSION (ARTES AT 4F.171)
The objective of the activity is to design, manufacture and test a thruster switching unit facilitating the connection of multiple electric propulsion thrusters to one or more power processing units for redundancy or configuration purposes optimising the system architecture.Targeted Improvements: - Improved efficiency (10% increase with respect to solid state solution).- Increased reliability with respect to a relay-based solution.- Reduced le…
DRAG AND ATOMIC OXYGEN RESISTANT CARBON FIBRE REINFORCED POLYMER FOR VERY LOW EARTH ORBIT TELECOM SATELLITES (ARTES AT 4A.092) (ON DELEGATION REQUEST)
The objective of the activity is to develop and test a coating material (e.g. for substrates such as carbon fibre reinforced polymer, polymers, etc) with improved atomic oxygen and drag resistance to be used on the external satellite surfaces for very low Earth orbit applicationsTargeted Improvements:- Enabling technology not existing today; allowing telecommunication satellites with conventional construction materials in much lower orbits tha…
HIGH POWER AMPLIFIER FOR THE OPTICAL L-BAND (1565 - 1625 NM) (ARTES 4.0 SL SPL 5G.043)
The objective of the activity is to develop an elegant breadboard of a high-power optical amplifier operating in L-band.TargetedImprovements:Enable access to spectrum in the optical transmission window(s) beyond the conventional C-band.Description:To date amplifiers in the optical L-band generate relatively low output power, which reduces their usefulness for high bandwidth data transmission. The activity will develop technologies to enhance t…
PROTECTION OF SATELLITE COMMUNICATIONS GROUND SEGMENT FROM INTERFERENCE/JAMMING INITIATED FROM LEO CONSTELLATION(S) (ARTES 4.0 SPL 4S 3D.030)
The objective of the activity is to examine the potential threat of New Space constellations to form a botnet able to generate intentional interference for other communications satellites, and to propose and assess relevant mitigation mechanisms.
CHARACTERISATION OF ATMOSPHERIC TRANSMITTANCE AT WAVELENGTHS TO BE USED IN TERABIT OPTICAL COMMUNICATIONS (ARTES 4.0 SL SPL 6C.053)
The objective of the activity is to characterise narrow attenuation lines (due to absorption or scattering) in the optical C-band (and ideally L-band) and to evaluate their effect on the communication performance of terabit-per-second feeder links. The activity will develop a testbed to perform measurements and to compare them against existing models. Targeted Improvements: 100% reliability improvement of terabit per second optical communicati…
BREADBOARDING OF CRITICAL TECHNOLOGIES FOR A MULTI-BEAM SATELLITE RECEIVER FOR AIRCRAFT MODE-S SIGNALS (ARTES 4.0 4S SPL 5A.082) (ON DELEGATION REQUEST)
The objective of the activity is to design, develop and test payload technologies compliant with multi-beam receivers for satellite-based air traffic surveillance. Critical breadboarding will be carried out to demonstrate the concept suitable for use on small satellites in LEO or MEO. Targeted Improvements: 50% reduced payload power consumption, mass and volume compared to current technology.Increase the probability of message detection by a f…
PROTOCOL FOR 5G INTEGRATED NETWORKS TO ENHANCE RELIABLE POSITIONING (ARTES 4.0 SPL 5G/6G 3F.024)
The objective of this activity is to design and develop a simulation testbed for secure delivery of assistance data with5G satellite networks to enhance positioning.Targeted Improvements:Foster the use of 5G satellite networks to enhance positioning with ubiquitous, reliable, and secure delivery of assistance data. Enable secure time and frequency synchronisation in existing or future telecommunication infrastructure.Description:Various positi…
L-BAND GALLIUM NITRIDE LOW NOISE AMPLIFIER-BASED RF FRONT-END (ARTES AT 5C.465) (ON DELEGATION REQUEST)
The objective of the activity is to design a compact L-band RF front-end for telecom applications which is based on a GaN Low NoiseAmplifier (LNA). A breadboard of a GaN microwave monolithic integrated circuit will be developed and tested. The RF front-end including the filtering function shall be modelled.Targeted Improvements: up to 30% mass and volume saving of the RF front-end (LNA and filtering) and 20 dB improvement of the LNA dynamic ra…
OPTICAL GROUND STATION NETWORK TESTBED (ARTES 4.0 SL SPL 6B.128)
The objective of this activity is to develop an optical ground station network testbed to which parties can connect their ground station and prototype network-related aspects for optical and quantum communications in an operational network environment. Targeted Improvements:Reduction of manual link planning and analysis effort. Testing and simulation capabilities for optical end-to-end data delivery. Description:The objective of this activity…
IMPLEMENTATION OF SOFTWARE MITIGATION SOLUTIONS FOR RADIATION-INDUCED SINGLE EVENT EFFECTS (ARTES 4.0 AT 5C.490)
The objective of the activity is to de-risk software mitigation techniques for radiation effects on a family of high-performance processors embedded in System on Chip (SoC) components. The activity will identify, on one or more processors of interest for the industry, radiation-induced failure modes and will implement appropriate software mitigation techniques with reuse or development of small FPGA IPs if needed. Targeted Improvements: Enable…
RAPID AND FLEXIBLE END-TO-END MANUFACTURING PROCESS FOR COMPLEX-SHAPED COMPOSITE REFLECTOR ANTENNA (ARTES 4.0 AT 5B.226)
The objective of the activity is to develop rapid and flexible advanced manufacturing techniques, with a full digital workflow, forhigh volume production of complex-shaped composite reflector antennas from 1 to 3.5 metres in diameter.Targeted Improvements:Reduction in composite reflector manufacturing time by a factor of five in comparison to standard metallic mould processes.Description:Today, the manufacturing lead time of reflector antennas…
W-BAND 100W CLASS WAVEGUIDE HIGH POWER ISOLATOR (ARTES AT 5C.517)
The objective of this activity is to design, manufacture and test a 100W W-band waveguide high power isolator engineering model forfeeder link applications.Targeted Improvements: Enabling technology development for W-band feeder links not existing today in ESAMember States.Description: The usage of the spectrum available in W-band for satellite communications offers the opportunity to reduce the number of gateways in the ground segment. For su…
BACKGROUND LIGHT AND ATMOSPHERE METROLOGY FOR QUANTUM KEY DISTRIBUTION AT URBAN LOCATIONS (4S SAGA)
Development of tools and hardware and the execution of a measurement campaign for background light and atmosphere conditions for Quantum Key Distribution (QKD) at urban location (major cities and metropolitan areas) under ARTES 4.0 Space Systems for Safety and Security (4S) Strategic Programme Line. These measurement results are an important check point to validate the design of the SAGA system. The background light and atmosphere metrology ac…
SOFTWARE EXECUTION ENVIRONMENT FOR INTELLIGENT APPLICATIONS (ARTES AT 4G.047)
The objective of the activity is to develop and test a configurable execution environment for an intelligent platform data handlingsystemTargeted Improvements:- 30% improvement of the performance of autonomous applications.- 50% reduction of the applicationsoftware integration and validation efforts.Description: The increase of processing power onboard spacecrafts will allow the implementation of intelligent functionalities such as early fail…
IP-CORE DEVELOPMENT FOR CCSDS-BASED OPTICAL PAYLOAD DATA RECEIVERS (ARTES 4.0 SL SPL 3C.047)
Objective: The objective is to design, implement and test the IP Cores of the receiver for the coding and synchronisation layer of the two CCSDS telemetry waveforms for optical communications. Targeted Improvements: New market opportunities for optical terminal and equipment manufacturers, addressing both photon-starved links up to 8Gbps and high data rate links up to 10Gbps. This activity will target to reduce by 50% the development costs in…